Can Recycling Tube / Bag Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drop your cans down the tube straight into the recycling bag.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
I used to drop my aluminum cans in a paper bag in the garage and them transfer them to the green bags accepted at the recycling center. I designed this to cut out the middle man and have a way to drop them straight into the green bag. Is it overengineered? Yes. Is that why it's so great? Yes. :)
I used a piece of silicone tubing to extend the 3D printed part and hold the mouth of the bag open. The tubing I used can be found here. If you'd prefer not to buy the fancy tubing you can just extend the 3D printed tube to your liking. I will eventually get around to posting a fully 3D printed version.
Recommended print settings: 3 perimeters, 20-25% infill, no supports
Required mounting hardware: 3 #6 sheetrock screws