1 / 3
Wand Ring for Hoover Vacuum — zdjęcie 1
1 / 3

Wand Ring for Hoover Vacuum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wand ring created to replace the one that broke on our Hoover MAXLive Pro Pet Swivel vacuum.

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Wand ring created to replace the one that broke on our Hoover MAXLife Pro Pet Swivel vacuum. It probably works for other Hoover vacuums as well. To remove the old one, I drilled out the rivets with a small bit and broke the top free.  I was then able to slide the bottom off then the broken part. Re-attached with a #8 3/8" stainless steel screw. 

Update - added another version with a reinforced back clip that hols the part where it clips into the vacuum much better. 

Took me about 40 min to print

Tagi