BBC micro:bit V2 Case - Optimized Remix (Speaker & Sensor Access)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated casing for the micro:bit v2. Made from two parts that will press-fit.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 117
- Wydruki
- 2
- Wyświetlenia
- 317
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Jubaz's micro:bit V1 case, specifically updated to provide full compatibility with the micro:bit V2. While the V1 and V2 share the same footprint, the V2's internal component shifts and new hardware features required a physical redesign for a proper fit and functionality.
Key Improvements:
V2 Component Alignment: Adjusted the internal back supports to clear the changed component layout on the V2 board, ensuring a flush fit without putting pressure on the hardware.
Audio Support: Added a dedicated cutout/clearance for the built-in V2 speaker.
Sensor Access: Widened the front opening to allow unobstructed access to the touch-sensitive logo and the built-in microphone.
Printing Recommendations
Material: PETG (recommended for the snap-fit tabs) or PLA.
Layer Height: 0.2 mm
Infill: 15-20% Rectlinear (or Grid).
Top/Bottom Layers: 4
Supports: None required (designed for print-in-place).