BBC micro:bit V2 Case - Optimized Remix (Speaker & Sensor Access)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated casing for the micro:bit v2. Made from two parts that will press-fit.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 117
- Makes
- 2
- Views
- 317
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of Jubaz's micro:bit V1 case, specifically updated to provide full compatibility with the micro:bit V2. While the V1 and V2 share the same footprint, the V2's internal component shifts and new hardware features required a physical redesign for a proper fit and functionality.
Key Improvements:
V2 Component Alignment: Adjusted the internal back supports to clear the changed component layout on the V2 board, ensuring a flush fit without putting pressure on the hardware.
Audio Support: Added a dedicated cutout/clearance for the built-in V2 speaker.
Sensor Access: Widened the front opening to allow unobstructed access to the touch-sensitive logo and the built-in microphone.
Printing Recommendations
Material: PETG (recommended for the snap-fit tabs) or PLA.
Layer Height: 0.2 mm
Infill: 15-20% Rectlinear (or Grid).
Top/Bottom Layers: 4
Supports: None required (designed for print-in-place).