Siemens vacuum cleaner connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A piece to connect a Siemens rapid vacuum cleaner to the big cyclone separator
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adaptor for https://www.printables.com/model/848504-big-cyclone-separator-for-a-vacuum-cleaner to connect hose of a Siemens vacuum cleaner to the inlet/input side of the cyclone.
This is a substitute for the original reductor. It fits tightly and supports also the clip function of the hose.
The files contain the 3mf model as well as the FreeCAD construction files in case someone needs to make adjustments.
I printed the connector in black PETG with 0.2 mm layer height in normal mode. Supports were necessary for the inner ring as well as the holes of the clip.