Hole size Checker → 1 - 10.9 mm / 0.1 mm steps ←
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Find the offset for your printed holes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
If you wanna print a 5 mm hole you have to print it bigger, but how much ?
You could check the "fit" you need for instance with a 5 mm Drill and take these numbers into your CAD Software to model your holes.
With 0.2 mm Layerheight (0.4 Nozzle) 0.28mm First Layer it needs just 3.3 Meter / 10.3 grams of Filament.
UPDATE: Because I discovered the Pause Button in Octoprint and while paused you can still move things around and also change the Filament, i rearranged the heights a little bit for Multicolor Print and for better readability. You can Pause the Print at Layer 6 (1.28mm) in Octoprint or by the M125 Command in the gcode.Turn the Printhead away,change Filament, extrude a little bit that you get a good consistant color, then hit resume. If you got a Multicolor Printer then it should be the M600/M601 command. There are 2 extra Files now:
_hole-size-checker-MULTICOLOR-oneFile
_hole-size-checker-MULTICOLOR-sperate I don't know if you really need the splitted version, but i dont know ;) |
( These Multicolor Files are normal Files, which you can Print whith any Printer even if you want print just one Color ! )