1 / 4
Hole size Checker  → 1 - 10.9 mm / 0.1 mm steps ← — image 1
1 / 4

Hole size Checker → 1 - 10.9 mm / 0.1 mm steps ←

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Find the offset for your printed holes

Rating
0 / 5
Likes
0
Downloads
13
Makes
0
Views
47
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Share Alike

If you wanna print a 5 mm hole you have to print it bigger, but how much ?

You could check the "fit" you need for instance with a 5 mm Drill and take these numbers into your CAD Software to model your holes.

With 0.2 mm Layerheight (0.4 Nozzle) 0.28mm First Layer it needs just 3.3 Meter / 10.3 grams of Filament.

UPDATE:

Because I discovered the Pause Button in Octoprint and while paused you can still move things around and also change the Filament, i rearranged the heights a little bit for Multicolor Print and for better readability.

You can Pause the Print at Layer 6 (1.28mm) in Octoprint or by the M125 Command in the gcode.Turn the Printhead away,change Filament, extrude a little bit that you get a good consistant color, then hit resume. If you got a Multicolor Printer then it should be the M600/M601 command.

There are 2 extra Files now:

  • normal File, one part

                    _hole-size-checker-MULTICOLOR-oneFile

  • splitted File, the base plate and the different colors (like numbers..) are seperate, but still in one File.

                    _hole-size-checker-MULTICOLOR-sperate

I don't know if you really need the splitted version, but i dont know ;)

( These Multicolor Files are normal Files, which you can Print whith any Printer even if you want print just one Color ! )

Tags