1 / 4
Closet rod bracket for 33mm wooden rod - with or without holes for Vedum wardrobe.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket with optional pins for vedum spaced wardrobes. (32mm cc, 5mm holes). Prints without supports.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Brackets to hold a 33mm rod (or any other dimension with changes to included step file).
I needed it to fit within a vedum wardrobe that had 5mm in diameter holes and 32mm cc between holes, so I added some pins that can be printed horizontally and then glued or just pressed in.
Also attached a STL without the holes, and the step file.