LONGER SUSPENSION ARMS FOR HNR 9804 - OLD VERSION
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OLD VERSION, TO SEE THE NEW VERSION FOLLOW www.embieracing.com Please share when printed :-).
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
HNR9804 is quite good model, but really narrow. I made these to have 195mm width, depeding on rims and setup you use. These arms also changing the wheelbase to standard 256 mm.
Newer version with updated geometry can be purchased at www.EmbieRacing.com for reasonable price
Printed with 100% infill of PETG is still not much strong, but for normal driving works good. Recommended to drill 3-3.1 mm holes, depends on your printer setup - Suspension needs to move completely free.
More RC rally stuff at www.EmbieRacing.com