Filament Spool Rack for 19qt (18L) Sterilite Dry Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified design to fit the layout of Sterilite's Gasket Box, suitable for 4-1kg spools. Room for desiccant below rack
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Spool Rack for a IP68 rated Sterilite 19 Qt (18L) gasket box. Compared to the 20Qt (19L) box, the 19Qt has is slightly smaller yet still accomodates four 1 Kg standard spools. The rack is positioned so the 200mm spools just fit under the cover ribs. About 41mm is left under the spools for loose or boxed desiccant. One advantage of the 19Qt vs the 20Qt is the support rod length is under 12" so the 4 ' rod could be used for two boxes.
Update: Revised the rack to better fit the side slope of the Sterilite Box.
You Need:
2x this part
2x metal rods 3/8" in diameter cut to 11 1/8" (282mm) length
19Qt Sterilte Container
Print Settings:
Infill: 15%
Layer height: 0.2
Supports: None