Stanley Lid Opener 40oz
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a tool to help take the lid off of a 40oz Stanley
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Original I remixed from Makerworld
This is a remix I made to a model that I found that way you don't have to use the straw to take the lid off. I also added a little lip at the top to make it easier to grip when you turn.
This is my very first model and posting a model ever, very new to 3d printing and hope this helps somebody 😊.
I posted pictures of my support settings that I used.
If you have OCD about your lids staying perfect you could sand down rough areas of the print if you wish.
Printed on Centauri Carbon
Layer height
.16mm
Print order
Inner/Outer/Inner
First Layer Speed
50mm/s
Outer Wall Speed
40mm/s
Inner Wall Speed
200mm/s
Walls
4
Infill
25% Gyroid