Stanley Lid Opener 40oz
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a tool to help take the lid off of a 40oz Stanley
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 67
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Original I remixed from Makerworld
This is a remix I made to a model that I found that way you don't have to use the straw to take the lid off. I also added a little lip at the top to make it easier to grip when you turn.
This is my very first model and posting a model ever, very new to 3d printing and hope this helps somebody 😊.
I posted pictures of my support settings that I used.
If you have OCD about your lids staying perfect you could sand down rough areas of the print if you wish.
Printed on Centauri Carbon
Layer height
.16mm
Print order
Inner/Outer/Inner
First Layer Speed
50mm/s
Outer Wall Speed
40mm/s
Inner Wall Speed
200mm/s
Walls
4
Infill
25% Gyroid