Counting matching models…
Made two new versions with a more durable tip. 2.1 New tip with wider angle 2.2 Extra edge blend added
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
print as shown in the photo. fast print, no supports, no brim. cheers! update 2-10-25 added 3rd version with two holes for 6mmx1.8mm magnets Category: Kitchen & Dining
Wanted an easy-to-reach place to hold some pens and a favorite knife. Used Tinkercad to join the models and edit the pieces.
Needs two magnets (size Ø10*3mm). One to catch the cap and the other to hold the bottle opener on a magnetic surface. Setup magnet by pressing or hammering them into the part. It's better to secure them in place with superglue. There is…
Needs two magnets (size Ø10*3mm). One to catch the cap and the other to hold the bottle opener on a magnetic surface. Setup magnet by pressing or hammering them into the part. It's better to secure them in place with superglue. There is…
Magnetic Bottle Opener with Cap Catcher. Perfect on your fridge ! I used magnetic tape (20mm x 2mm) purchased on internet: https://s.click.aliexpress.com/e/_c3Foy5kB To set it up, cut the magnetic tape to the desired length and attach it…
Fidget Box Opener Like the original model, just make a ring on the inside to make it spin. Print setting : 0.2 layer height 3/4 perimeters 15% or more infill if u want it solid gyroid infill random z-seam Print in place. 2 versions…
Easy to print, less filament, and works great! Same concept, all with less filament, and same functionality!
Overview This is a 3×5 Gridfinity insert designed to hold a pizza cutter, ideal for keeping your kitchen drawer or workshop more organized. It’s something I made for fun and thought others might find useful too. Versions Included There…
I have redesigned the Prusa bottle opener for my school student club ESC - Engineering Student Club. The coin hole is also larger at 2,1mm for easier coin insulation. You have to use 1,- CZK
Categoría: Producto de apoyo Contexto de uso: Alimentación y ocio Modo de uso: Para abrir tarros y envases con tapones de hasta 25 mm de diámetro Notas: Compatible con los tapones de leche Hacendado Recomendaciones: Consulta el modelo…
No-Support Universal Bottle Opener (Coin-Assisted Design) No-support-required, the 3D-printable universal bottle opener is designed to open both twist-off beer bottles and standard metal/plastic bottle caps. The design uses a South…
Dual ring for easily opening the cap (only the most common size of approx. 30mm DIA) of a plastic/PET bottle. Sizes Five different sizes of hole for caps are available. (Only one size of hole for fingers, 22mm.) I recommend that you try…
Dumbbell shaped can opener. Four printed pieces, one m3x30mm bolt. Printed with PC, but PETG should be plenty strong. Top piece is attached with superglue.
Opening and closing tool for standard (ribbed) lids of canisters (1L-60L) used in schools, laboratories etc. This is an alternative to the conventional wrench style designs commonly used for this application. I found this design to offer…
Opening and closing tool for Pyrex screw caps used for various test tubes and bottles in schools, laboratories etc. It's ergonomic shape and increased diameter reduces the required force for opening. This can be helpful for e.g. people…
This is a tomato-themed coaster with an integrated bottle opener , designed to look great on a table while still being fully functional. The model prints in three separate pieces , so no multi-material printer is required . I personally…
A practical and compact can opener designed for everyday use. Its ergonomic design ensures a comfortable grip and a simple, durable construction. Its small size makes it ideal for use in the kitchen, on a camping trip, or as a spare can…
If you have a SureFeed MPF001 and it runs its motor but can't lift its lid, you may need this part. Or maybe https://www.printables.com/model/209284-surefeed-mpf001-lid-opener-repair-part Open it up and take a look. I replaced the short…
Attaches a garage door remote to a car sunscreen. Measurements Remote space: 1.38cm deep 5.7cm wide My garage door remote is around 1.4cm thick, but I've made this 2mm smaller to create a tight fit. Open on both ends, so a longer object…
bottle opener using a 2 Euro Cent Coin to make it durable
Holes added to curved part to allow for access for set screw tightening if so inclined.
This is a small replacement part designed for the SureFeed microchip cat feeder that props open the clear plexiglass lid. It goes inside the body of the feeder and pivots around a metal rod. The part is lightweight, easy to print, and…
Yes, you probably don't need it. But I've been using this tool for over a year now and I really got to like it. That's why I decided to share the model.
İstediğin zaman çıkarıp takabildiğin 1tl ile şişe açacağı. 2023'den sonra 1tl daha ince (1.6mm) olduğu için iki farklı versiyon mevcut. eğer paran 2023'den önce basılmış ise 1.8mm olan versiyonu kullanmalısın. type-c soketli versiyon da…
Vytištěno z PETG, bez nutnosti podpěr. Budu rád za LIKE, případně foto a koment :-) Printed from PETG, no supports required. I would be happy for a LIKE, or a photo and comment :-)
Print Settings This model was printed on a Prusa CORE One using the following settings: 0.4 mm nozzle 0.20 mm layer height PETG filament 3 perimeters 30% gyroid infill 33 minutes print time 9 g material No supports required. Standard…
!!!WIP!!! After some field testing, some reinforcement is needed. Keep an eye out for the next version after V3. Recommend 8 perimeters, and at least 5 top and bottom layers to make sure it is strong enough. V3 includes a T20 bit on the…
PopClamp Under-Table Bottle Opener – perfect for opening cold ones with ease. This design uses a metal bottle opener insert purchased online: https://s.click.aliexpress.com/e/_c31u7uST The insert fits securely into the 3D-printed part for…
Accessibility aid for opening plastic water bottles. Works with PLA. Proven to work with the following brands: Poland Spring 16.9oz Sam's Club 16.9oz (print at 93.5% scale) (If you try another brand let me know if it works or not)
Most MX-Style switch openers are printed vertically, resulting in low stability of the "tips" which have to pry the switch legs open. This model has been designed to be printed flat in two pieces (both are identical, so print the file…
I designed these flexible grip pads specifically to maximize the unique friction and flex properties of TPU. Simply place the pad over any tight lid, apply a little pressure, and twist. The textured surface grips the lid securely, giving…
Schlüssel und Halterung werden zusammen gedruckt. Das Loch in der Halterung ist für eine Senkkopf-Schraube 4,5 x 16. Im Schlüssel und in der Halterung ist je ein Loch mit 4 mm Durchmesser und 6 mm Länge für Magneten. Schlüssel zum Öffnen…
chopsticks that have a wedge to get under soda can tabs.
Clip-On Ski Goggle Scraper with Bottle Opener – Because Vision Is Optional Yes, it clears snow and ice from your goggles. Very responsible. Gold star. But the real MVP is the built-in bottle opener, always ready to crack a cold one when…
simple opener/key for omega seamaster 600. I printed in pla 0.15mm 10%infill. Worked great.
A simple and practical flat bottle opener designed for easy 3D printing. The model has a clean and minimal design that prints quickly and requires no supports. It is compact, lightweight, and comfortable to hold while opening standard…
Simple, strong and easy-to-print bottle opener designed for everyday use. This 3D printable bottle opener is designed to be compact, durable and easy to print without supports. The flat design makes it comfortable to hold while still…
Remixed to use an 8mm x 3mm magnet so it can attach to refrigerator door.
Print at 0.2mm layerhight. The colourchange occours every second layer. Also remember to pause the print for the coin! Pause is already included in my gcode. Colour-order: basecolour (grey) - white- yellow- red- black
A fully 3d-printed lightweight package opener.
Categoría : Producto de apoyo Contexto de uso: Alimentación y ocio Modo de uso : Para abrir latas mayoritariamente de conservas y/o con anillas grandes y de gran recorrido de apertura (sardinas, mejillones, etc.) Recomendaciones : Los…
I needed a easy way to open those tiny paint pots, and I couldn't find one on the web, so here is a opener (spanner) that makes it very easy. You may or may not need to cut one of the tabs on the lower paint pot for this to work. All the…
Skateboard T-Tool with Bottle Opener – Everything You Need On and Off the Board This versatile T-tool handles all essential skateboard adjustments and includes a built-in bottle opener for your post-session apéro. Features three standard…
The Momcozy milk warmer bottle opener, but only one piece so without the hard lock swiping it down.
Anyone who owns an Emsa Travel Mug knows the problem: sometimes the lid is screwed on so tightly that opening it becomes surprisingly difficult, especially due to the small grip surfaces. This tool is designed to solve exactly that. It…
This is the Original I remixed from Makerworld https://makerworld.com/en/models/2345212-stanley-40oz-quencher-lid-opener?from=search#profileId-2564038 This is a remix I made to a model that I found that way you don't have to use the straw…
Simple replacement handle for a manual can opener. Designed to replace a broken original handle.
I wanted a small box opener that can fit in my wallet, but I didn't want to have something super sharp that i could cut myself with. I decided to model up this box opener that is meant to fit in most wallets or could hang on a keychain.…
A simple and handy box opener designed to fit on your keychain. The flat profile makes it comfortable to carry, while the functional blade lets you slice through tape with ease. No more broken nails! Features: Lightweight & slim design…
A mount for the YoLink Finger and Genie Garage Door Opener. I wanted to have a easily movable mount for the YoLink Finger for my Genie Garage Door. Created this to allow me to move the mount anywhere that the Garage Door Opener could…
v2: Added a pin for breaking the seal off of a new bucket and improved the internal slits. Someone asked for a bucket-opener on a FB group I am in, and since this will be very usefull for me also, I gave it a go. The model has 3x5 embeded…
This is a Samurai I designed to look as if he is offering a sword up to his Master or Shogun. I happen to have a small katana/letter opener that fits in his hands, but they were designed to fit a pen as well. Turned out nice printed…
A simple and handy tool designed to easily open "Lavazza A Modo Mio" compatible coffee capsules for proper recycling. Why? While compostable capsules exist, many brands (including Lavazza itself) still rely heavily on plastic capsules. To…
Just added a simple holder on the side of the capsule storage, for the Tassimo pod opener I use. This means, hopefully, you can't lose it. The storage holder was a design on MakerWorld, whilst the opener, was on Printables. Due to a…
Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…
I recently upgraded my original CORE One to a CORE One+, mainly for the automatic vent opening/closing feature. In my experience, the vent would properly close but it would not open entirely, leaving about 1.5mm of possible travel…
This model is of a can and bottle opener that also has the ability to puncture a hole in the side of a can.
This is a compact, ergonomic, and safety-focused box opener designed for everyday carry (EDC). Its unique shape features a finger loop for a secure grip and a specialized hook-shaped "S" blade that pierces and slices through packaging…
This is a quick and simple bottle opener design I created. It’s my first version and hasn’t been fully tested yet. Feedback and suggestions for improvement are highly appreciated. Das ist ein schnelles und einfaches Flaschenöffner-Design,…
I printed this with PLA Carbon Fiber, below are some of my settings that I have used. 0,1mm Layer Height 8 Perimeters (fewer would be enough, I just wanted to be sure) 100% Infill Normal Painted Supports With 0,3mm Top Z Distance (my…
The Super Best Bottle Opener is great, but my "better half" requested one with a longer handle, so I stretched the handle a bit so it fits further into your hand. I also had problems printing the overhang on the original, so I widened the…
I use coffee capsules in my coffee machine. Out of laziness, I always throw them straight into the trash, which turns out to be a mistake every time, as the bin always ends up floating. The capsules still have water inside, and I don't…
The plastic spring used nowadays by LGB to push up the coupling hook deteriorates over time. These sagging hooks result in spontaniously unhooking of wagons in your trains. This is my attempt to fix this by using a spring salvaged from a…
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
Bag strap bottle opener. Perfect on your bag ! This bottle opener is design for straps of 25 mm width and lower. Needs one magnet (size Ø10*3mm) to catch the cap. Setup magnet by pressing or hammering them into the part. It's better to…
Small bottle opener. Perfect on your key-ring or on magnetic surface ! Needs two magnets (size Ø10x3mm). One to catch the cap and the other to hold the bottle opener on a magnetic surface. Setup magnet by pressing or hammering them into…
Magnetic bottle opener. Perfect on your fridge ! Normal version needs six magnets (size Ø10x3mm). Topological optimization version needs five magnets (size Ø10x3mm). One magnet catch the cap, the other hold the bottle opener on a magnetic…
Zip-tied bottle opener. Perfect on your bike or on any tubes you want ! Needs one magnet (size Ø10*3mm) to catch the cap. You can attach it on cylinder of diameter around 26-32mm. Setup magnet by pressing or hammering them into the part.…
Wall screw bottle opener. Perfect on your wall or anywhere you want ! Needs one magnet (size Ø10*3mm) to catch the cap and one M4 (minimum lenght : 12mm) wood-screw to attach it where you want ! Setup magnet by pressing or hammering them…
Since original version 1 of the Rocket Beans TV bottle opener from RocketBeansTV unfortunately has a "bug" and is not correctly printable with Cura and AnkerMake Slicer, etc. based on my experience and others' comments, I have rebuilt the…
This bottle cap opener has two print options: A single, unified body that has a 27mm socket on one side, and a 30mm socket on the other. Will need to print with supports. The part is split in half for easier printing without supports. One…
This letter opener was printed with PLA, nozzle 0.4mm, layer 0.20 mm. No supports, Infill 15%. Dimensions: 20cm x 2,5cm
I designed this for my son so he could open his own tins of soup for lunch.
Bottle Opener Introduction. Incorporating a blend of traditional and modern elements into 3D printing is innovative. Your use of a wood handle and a screw for the bottle opener adds a classic touch to the design. The inclusion of multiple…
Hello When I had to change the battery on my MB key, I was so annoyed by the (very) small button on the back, which has to be pressed to release spare key and loosen the backplate (to get to the battery). Therefore, I made a small 'tool'…
Intro The CapMaster is not just another bottle opener — it’s the ultimate opener for makers, tinkerers, and 3D printing enthusiasts . Designed specifically for people who love smart, minimal, and functional tools, this opener combines…
A simple tool to easily open canisters. Works for canister caps with a diameter of ~60mm. I used 4 walls and 45% infill for stability.
Jar holder and Jar opener; specifically for 24 ounce jar. The jar is 80mm square. Suggest 6 perimeters, 20% infill, PETG for strength. If you need to scale this, suggest you print a thin amount and determine the scale factor. I hope you…
This is more of a "lop off the end" than a remix. I liked that the bottle opener part of the UBO didn't damage the cap, since I collect bottle caps for a friend overseas. Anyway, I wanted just the opener part, so I cut off the end, filled…
This is just an elongated version of https://www.thingiverse.com/thing:40131 I just doubled the length of the handles. Category: Household Supplies
