1 / 5
Plastic/PET Bottle Cap Opener
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual ring for easily opening the cap (only the most common size of approx. 30mm DIA) of a plastic/PET bottle.
- Rating
- 4.75 / 5
- Likes
- 183
- Downloads
- 1,307
- Makes
- 28
- Views
- 3,997
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dual ring for easily opening the cap (only the most common size of approx. 30mm DIA) of a plastic/PET bottle.
Sizes
Five different sizes of hole for caps are available. (Only one size of hole for fingers, 22mm.)
I recommend that you try printing size “03-Medium” first. Then, if the size does not fit your bottle cap, try another size.
- 01-ExtraSmall ─ (-0.4mm in DIA)
- 02-Small ─ (-0.2mm in DIA)
- 03-Medium ─ (±0mm in DIA)
- 04-Large ─ (+0.2mm in DIA)
- 05-ExtraLarge ─ (+0.4mm in DIA)