1 / 2
Bottle opener
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use 20%-30% infill and set the top and bottom layers to zero.
- Rating
- 4.625 / 5
- Likes
- 90
- Downloads
- 1,128
- Makes
- 18
- Views
- 2,971
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
This model only works with slicers that have honeycomb infill (Prusa Slicer) as long as you want to see the honeycomb pattern.
Set the top and the bottom layers to zero and infill to something between 20%-30%. This will make the infill visible and gives the honeycomb pattern.