Door opener, corona, hands free, quick to print, covid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi, this is my first model, quick to print in 0.3mm layer height. You just need 2x M5x20mm screws + nuts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 99
- Makes
- 0
- Views
- 687
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Hi,
this is my first model, quick to print in 0.3mm layer height.
You just need 2x M5x20mm screws + nuts.
The diameter for the door grip is 20mm.
To make it fit better, you can put some double sided tape or rubberband between the doorhandle and your printed opener.
This makes sure, that it don´t turn around if you pull it hard.
Print instructions
Layer height 0.3mm (standard prusa slicer settings, no changes)
Material: PETG
Infill: 20%
Printtime: 2h 6min
You need 2 pieces of M5x20mm screws, plus 2 nuts.
If the nuts don´t fit, just use a longer screw, to pull the nuts into the printed model. (prusa trick)