1 / 13
Door opener, corona, hands free, quick to print, covid — zdjęcie 1
1 / 13

Door opener, corona, hands free, quick to print, covid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hi, this is my first model, quick to print in 0.3mm layer height. You just need 2x M5x20mm screws + nuts.

Ocena
0 / 5
Polubienia
4
Pobrania
99
Wydruki
0
Wyświetlenia
687
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hi,

this is my first model, quick to print in 0.3mm layer height.

You just need 2x M5x20mm screws + nuts.

The diameter for the door grip is 20mm.
To make it fit better, you can put some double sided tape or rubberband between the doorhandle and your printed opener.
This makes sure, that it don´t turn around if you pull it hard.

Print instructions

Layer height 0.3mm (standard prusa slicer settings, no changes)
Material: PETG
Infill: 20%
Printtime: 2h 6min

You need 2 pieces of M5x20mm screws, plus 2 nuts.

If the nuts don´t fit, just use a longer screw, to pull the nuts into the printed model. (prusa trick)

Tagi