Counting matching models…
This is a direct replacement lid for 40oz Stanley The Quencher Tumbler. My wife's tumbler was knocked off the bleachers at a baseball game the other day breaking the lid. Instead of buying the $10 replacement, she ask if I could give it a…
A simple snack tray that fits over the top of a Stanley Tumbler (40oz). Divided into four sections with a “bridge” to sit above the tumbler's handle. Use at your own risk; special consideration should be given to food safety. Printing…
Printed at .1mm layer height in PLA
Under the stl file is a 3mf file for Bambu Studio. Using a site like Tinkercad, you can easily add your own words onto this. To change the text in Bambu Studio, press on the objects button, then select “text_shape”. After that, then press…
I made this cap to cover the straw to keep dust and particles out of my tumbler. It prints easily as oriented in the STL without supports.
Here's a a few simple boots for 64oz, 32-40oz and 12-20oz Hydro Flasks. There is also a version for the narrow top Hydro Flask and the Tumbler Hydro Flask . Please note, this MUST be printed in TPU to fit as rigid filaments will not work.…
This is a remixed model of the "2019 Subaru Crosstrek_40 oz Water Bottle Holder" made by tomecar. The goal of this remix was to reduce overhang angles to a max of 45º and to smooth out the overall geometry and appearance. Compatibility I…
UPDATE 8/24/20: I've added Fusion 360 and STEP files for easier remixing. Sorry for not adding them sooner! I'm not hardcore about my bike nor about bike stuff, but I do care about having a good water bottle with me when I ride. So I made…
This model is specifically designed to fit in a 2016 Ford Escape cup holder but would likely fit in other vehicle cup holders.
The cup holder position on this car didn't allow me to use the standard cup holder extension with my favorite water bottle so I made this. It's not perfect but it's more than good enough for me and holds my water bottle. Might tweak it…
There are a couple Owala bottle boot designs out there. I wasn't satisfied with any of them so I modelled one up with thinner walls, a chamfer on the bottom to help with printability and an optimal diameter. I have made 2 sizes to fit the…
Hello all! I needed to make a cup adapter for my large water bottle for my car (which is a 2018 Honda Pilot). I figure that different cars have different cup holder sizes. I designed this one to be strong and be printed with very little…
This model is for the STANLEY QUENCHER H2.0 FLOWSTATE™ TUMBLER | 40oz/1.2L V2: I had to revise the original design after realizing that it is too tall for most printers. Model has been reduced to just under 250mm high. Also added solid…
This is for the newer(rounder) style handle. Build in PETG. Depending on the brand of chapstick and label thickness, there may be some tearing or catching of the label. *The fit is tight, you will have to turn it 90 degrees and press onto…
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 46% Filament brand: esun Filament color: yellow and white Filament material: pla+
Here's my take on a water bottle cup holder adapter, mainly for my 40oz Owala FreeSip. My 2014 Toyota Corolla's cup holders are really only designed for cans an cups with a tapered bottoms. Anything with a thick bottom won't fit, so here…
Do not use PLA or the heat from inside your car will distort the shape quickly. Use PETG or something with a higher glass transition temperature. No supports are required, just print standing upright. Originally posted at:…
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 46% Filament brand: Mika3D Filament color: white and green Filament material: pla silk
This model is best printed in TPU or another flexible filament so it still protects your hydroflask. I printed the one shown in Overture TPU at the following settings on my Prusa mk3s+: Layer height: 0.2mm All speeds: 20 mm/s Infill:…
just something i fused together for myself and thought i might as well share it
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 46% Filament brand: mika3d Filament color: gold and white Filament material: pla silk
Bottle sleeves for HydroFlask, ThermoFlask or similar double walled vaccuum sealed water bottles: 32 or 40oz. One version has a breather hole for easier installation. Printed in Overture TPU 0.2mm layer height 0.4mm stock nozzle
The water bottle doesn't fit into a normal car cup holder so I made this.
Tumbler 40 oz handle replacement. Fasteners: 1x M4x16 mm Allen Screw (SHCS) 1x M4 nut (nylock) Material: PLA, PET-G, ABS, ASA etc. Layer high: 0,3 or lower. No supports needed.
This is a 2 piece holder for a Stanley 40oz insulated cup for mounting in a Disney brand "Bog Bagg" The top ring will hold the cup in place while the bottom supports the weight. I've printed it in PLA and TPU. I would recommend PETG to…
I love my Owalla 40oz water bottle but the cupholders in my Chevy Tahoe definitely won't fit it, so I made an adapter that will fit into the existing cup holder. Should work with a 2024 and 2025 Chevy Tahoe (Mine is a 2024). I included…
My wife's church group recently had 40oz tumblers made with the groups name and insignia on them. I thought it would be helpful to print TPU caps for the entire group. I printed the first batch in Overature blue 95a TPU, and those are…
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 46% Filament brand: esun Filament color: yellow and white Filament material: pla+
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 60% Filament brand: esun Filament color: white/black Filament material: pla+
Comes in 4 parts, Spine and Bottom can be printed to your discretion, however the Top and Middle need to be printed with 100% infill since they are going to be flexing and this will keep them functional… I hope Uses existing bike mount…
Revision 2.0 Notes: Changed default parameters to improve fit and function. Reduced height of cap to 16mm. A TPU straw cover designed to fit the 10.5mm diameter silicone straw on the 40oz Hydroflask cup. The model is parametric so it…
Fits car cup holder & Owala 40oz
This is the Original I remixed from Makerworld https://makerworld.com/en/models/2345212-stanley-40oz-quencher-lid-opener?from=search#profileId-2564038 This is a remix I made to a model that I found that way you don't have to use the straw…
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 60% Filament brand: esun Filament color: white/black Filament material: pla+
This is a protective sleeve designed to fit a 40oz, wide mouth Hydro Flask water bottle and is modeled with a hexagonal / honeycomb design. It may or may not fit other brands of similarly sized bottles, but I have included the .STEP file…
I previously printed using the 30oz that i have remixed from, however it was too small for my daughter's new cup. So I set about updating to fit an already brilliant model on Makerworld by “Melissaderr” (thank you, Melissa).…
Got this knock off 40oz stanley from amazon but realized quickly that its kinda annoying to not have a handle for something this big. Lucky I have a printer eh! The ring tapers from 10-10.5 mm in order to slide on and just friction fit…
This is a bottle holder that suits Gen 1 Surbaru Crosstrek, and holds hydroflash bottles alike with(or w/o) rubber boot.
ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 49% Filament brand: esun Filament color: black Filament material: pla+
Wall mount cup holder uses #8 screws fits 30oz & 40oz tumblers
Water bottle holder for 40OZ LTT water bottle. The stock water bottle holder on my ergometer only fitted the 21OZ bottle therefore I designed a bigger one. Printed in PETG works flawlessly. Has a satisfying perfect fit. Has a hole spacing…
I wanted a pot i could see the water level without letting a lot of light in. This works out cheaper and better than mason jars. It only requires a small piece(13cm) of ¼ inch id tubing, for the water level indicator, and a 2 inch or 50mm…
I created this water bottle holder to be mounted to the FITS slot in the back seat of the Ford Maverick. From the driver seat, I can easily reach back and grab/replace my water bottle while driving without taking my eyes off the road.…
PATRIOTIC POPSICLE BOMB POP STANLEY LID TOPPER 20/30oz and 40oz versions both included 3D realistic “patriotic popsicle” bomb pop ice cream if printing multicolored print standing up with supports and a brim for less color changes I…
Taylor Swift TTPD 40oz Stanley cup lid topper My daughter loves Taylor Swift and after printing her a topper, she asked if i could design some other albums for her. How could I refuse?! I hope you like the print and this also brings your…
Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 60% Filament material: PLA Filament brand: esun Filament color: black/silk green
Works on a 40oz stanley
You know you want it! Look at the pictures for how I did supports. Manual tree supports on all low hangers! Oh god I lost my colored 3mf file! I'm so so sorry, I'll try to put a new one up!
I created this ThermoFlask 40oz cup holder adapter for my 2017 Kia Sorrento. It fits pretty well but can be a bit snug with the rubber bottom on the bottle. I printed it with ASA at 30% infill which is likely more then needed.
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 49% Filament brand: esun Filament color: purple & yellow Filament material: pla+
Revision 2.0 - Made wall thickness 1.6mm, reduced diameter by 0.5mm for an interference fit, repaired a parametric design error with the top edge fillet. This boot fits the 40oz Hydroflask cup with silicone straw (as seen at Costco). It…
Designed to snugly fit the Stanley Quencher 2.0 40oz tumbler. Print settings: TPU, 2-3 perimeters, 15% infill
My daughter loves Taylor Swift and after printing her a topper, she asked if i could design some other albums for her. How could I refuse?! I hope you like the print and this also brings your loved one some “bling" to their Stanley.
This cup holder adaptor was designed to solve a simple problem: fitting a Skault 1.2L (40oz) water bottle securely into a standard vehicle center console cup holder . The adaptor was designed around the center cup holders of a Ford Kuga ,…
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 60% Filament brand: esun Filament color: red/black Filament material: pla+
Trumpet themed name tag topper with border. I integrated this trumpet model from Thingiverse and edited the base name tag model to give it a border that also rises above the model like the name and trumpet. Made it for a friend who plays…
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 60% Filament brand: esun Filament color: black Filament material: pla+
I printed at .2 for speed but change to whatever quality you would like! 3-4 walls for strength 25% infill Share your makes or Lucky snake will not be lucky! haha Thank you for your support! Your likes, comments and makes go a LONG way in…
This is for a 40oz Owala Insulated water bottle. This was printed with PLA on my Flashforge AD5M with slightly adjusted Flashforge HS PLA settings. Reach out with any questions :)
Designed to snugly fit the Stanley Quencher 1.0 40oz tumbler. Print settings: TPU, 2-3 perimeters, 15% infill
i got the idea from a video here: https://www.youtube.com/watch?time_continue=53&v=asCGdnVlXyg&feature=emb_logo mine is made to hold a 40 oz tumbler. the top can come off if you dont want it on, and just use the ergonomic handle. i…
21oz and 64oz versions are in the works, check back in a bit! My LTT water bottle was a bit too loud for me when setting it down on a table. This bump sleeve not also quiets it down a lot but also protects your hydration container from…
40 oz Removable Bedside Water Bottle Holder with Hidden Tapered Dovetail Mount This is a heavy-duty screw-mounted water bottle holder designed for loft beds, bunk beds, bedside rails, desks, or anywhere you want a large bottle securely…
Because this bitch is never happy i used cookiecad petg. Only the best is never enough! I just paused at the correct height and changed filament for the color change.
I love my Owalla 40oz water bottle but the cupholders in my Chevy Tahoe definitely won't fit it, so I made an adapter that will fit into the existing cup holder. Should work with a 2024 and 2025 Chevy Tahoe (Mine is a 2024). I included…
This cup holder adaptor was designed to solve a simple problem: fitting a Skault 1.2L (40oz) water bottle securely into a standard vehicle center console cup holder . The adaptor was designed around the center cup holders of a Ford Kuga ,…
This is the Original I remixed from Makerworld https://makerworld.com/en/models/2345212-stanley-40oz-quencher-lid-opener?from=search#profileId-2564038 This is a remix I made to a model that I found that way you don't have to use the straw…
The water bottle doesn't fit into a normal car cup holder so I made this.
printing in ABS, big ring down on hotbed, support is tree small, 4 wall lines, variable layer high, infill 30% PS: the diameter of the rings can be lightly bigger.
Revision 2.0 - Made wall thickness 1.6mm, reduced diameter by 0.5mm for an interference fit, repaired a parametric design error with the top edge fillet. This boot fits the 40oz Hydroflask cup with silicone straw (as seen at Costco). It…
Revision 2.0 Notes: Changed default parameters to improve fit and function. Reduced height of cap to 16mm. A TPU straw cover designed to fit the 10.5mm diameter silicone straw on the 40oz Hydroflask cup. The model is parametric so it…
This model is NOT expected to hold up to actual use, especially if actual water is added to the bottle. I have not printed it to test it, but I have measured my own 40oz water bottle (91mm diameter) to construct the model. I am not…
You will need two M3x20 hex bolts and nuts. I recommend printing in PETG or something stronger than PLA, especially for the clip. I printed the clip with 100% infill.
🎄✨ Add a little holiday cheer to your favorite tumbler! Meet the Kawaii Christmas Tree Stanley Lid Topper (40oz) — a cute and festive 3D printed accessory that hugs your straw and instantly transforms your cup into a merry, feel-good…
Replacement handle for a TAL Core 40oz. You can use any filament you want but keep in mind that if you put it in a dishwasher you need to use PETG as a minimum since PLA may soften if the water is hot enough. I used 3 walls, 20% infill.…
Material: TPU (have not tested PETG, but it is a tight fit) Nozzle: 0.4mm Layer Height: 0.2mm Printed in Overture Space Gray TPU
My family goes through a lot of this peanut butter so we have an almost unlimited supply of these containers. I wanted to use them to store fasteners but I rarely have enough to fill a whole jar. So I made dividers and a “lid” to make…
Adapter to allow a 40oz hydroflask style bottle to fit “in” a standard vehicle cup holder.
You can download this file and add any name you would like. If you use prusa slicer you can right click choose add part then text and you can then type in what you would like to add.
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 49% Filament brand: esun Filament color: white and black Filament material: pla+
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 60% Filament brand: esun Filament color: yellow Filament material: pla+
Printed with petg. .2 layer 3 perimeters Infill 15% no supports needed
We found the 40oz Ello Stainless Steel Tumbler sold at Sams Club was a bit top heavy and tended to knock over easily. I made these feet to press on around the house to make them more stable.
