150x100x70 Weatherproof Enclosure Internal Mount Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom-designed internal mounting grid for a standard 150x100x70mm waterproof electronics enclosure
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Overview
This internal mount plate is specifically designed to fit the bottom of a common 150x100x70mm weatherproof project box. It provides a secure, elevated platform for mounting microcontrollers, sensors, relays, or battery packs using self-tapping screws.
Added an untested plate for the box with metal lids as well. This box is slightly smaller on the inside.
Features
Grid Pattern: The open grid design reduces filament usage while offering unlimited mounting points for your electronics.
Bolt-On Design: Features dedicated mounting holes aligned with the enclosure's internal standoffs for a perfect fit.
Fusion 360 Precision: Modeled with tight tolerances to ensure it drops into the box without rattling.
Protection: By mounting to this plate, you maintain the waterproof integrity of the outer enclosure as no external holes are required for component mounting.
Print Settings
Material: PETG or ASA (Recommended for outdoor use/temperature resistance).
Layer Height: 0.2mm.
Infill: 20% (Grid or Gyroid).
Supports: Not required.