150x100x70 Weatherproof Enclosure Internal Mount Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom-designed internal mounting grid for a standard 150x100x70mm waterproof electronics enclosure
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Overview
This internal mount plate is specifically designed to fit the bottom of a common 150x100x70mm weatherproof project box. It provides a secure, elevated platform for mounting microcontrollers, sensors, relays, or battery packs using self-tapping screws.
Added an untested plate for the box with metal lids as well. This box is slightly smaller on the inside.
Features
Grid Pattern: The open grid design reduces filament usage while offering unlimited mounting points for your electronics.
Bolt-On Design: Features dedicated mounting holes aligned with the enclosure's internal standoffs for a perfect fit.
Fusion 360 Precision: Modeled with tight tolerances to ensure it drops into the box without rattling.
Protection: By mounting to this plate, you maintain the waterproof integrity of the outer enclosure as no external holes are required for component mounting.
Print Settings
Material: PETG or ASA (Recommended for outdoor use/temperature resistance).
Layer Height: 0.2mm.
Infill: 20% (Grid or Gyroid).
Supports: Not required.