Towel Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed @Rothamun_1204451 model to use on my bathroom door.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple remix of Rothamun
Extending the door dimensions to fit my bathroom door.
Standard USA doors are around 35mm. My door has been painted multiple times, so with digital calipers it measured just shy of 36.5mm.
Printer- Elegoo Centauri Carbon
Material - Basic PLA
Settings
Layer Height - 0.2mm
Ironing - Topmost Surface
Seam Position - Aligned Back
Wall Loops - 2
Top/Bottom Layers - 6
Infill Density 7%
I used slim tree supports for the small arched accents of the print, but I don't think it's needed.
Slim Model
Lastly, I was barely able to close my door with this print. This could simply be door alignment. The slim model has been shaved down 1.5 mm along the top of the print.
Hope this could be of use.