1 / 3
Carrying Case for the Fnirsi DPS-150 PD Power Supply — zdjęcie 1
1 / 3

Carrying Case for the Fnirsi DPS-150 PD Power Supply

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With 1- and 2-material versions of covers and cable storage

Ocena
5 / 5
Polubienia
8
Pobrania
19
Wydruki
2
Wyświetlenia
164
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A case for the Fnirsi DPS-150 PD power supply. With cable management. There are two versions of top cover—1 material or 2 material, where you can use TPU to make a soft cushion to avoid scratching the display screen.

Instructions for printing:

Print one band, one top cover, and one bottom cover. No supports should be necessary. If you have problems with the band, add a little brim.

PLA or any other hard plastic should work.

Choose the 1- or 2-material top cover, depending on your printer capabilities. If you are doing the 2-material cover, use TPU for the two cushions for the display.

Fusion won't let me orient the top housing properly, so don't forget to rotate it with with the wide part downwards.

Instructions for use:

After it is printed, it's ready for use. Insert the banana connectors into the holes, wrap the cable around the respective cover, insert the power supply into the bottom cover, and put the top cover on top. Slide the band onto the two assembled covers. See pictures if anything is unclear.

Tagi