1 / 3
Carrying Case for the Fnirsi DPS-150 PD Power Supply — image 1
1 / 3

Carrying Case for the Fnirsi DPS-150 PD Power Supply

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

With 1- and 2-material versions of covers and cable storage

Rating
5 / 5
Likes
8
Downloads
19
Makes
2
Views
168
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

A case for the Fnirsi DPS-150 PD power supply. With cable management. There are two versions of top cover—1 material or 2 material, where you can use TPU to make a soft cushion to avoid scratching the display screen.

Instructions for printing:

Print one band, one top cover, and one bottom cover. No supports should be necessary. If you have problems with the band, add a little brim.

PLA or any other hard plastic should work.

Choose the 1- or 2-material top cover, depending on your printer capabilities. If you are doing the 2-material cover, use TPU for the two cushions for the display.

Fusion won't let me orient the top housing properly, so don't forget to rotate it with with the wide part downwards.

Instructions for use:

After it is printed, it's ready for use. Insert the banana connectors into the holes, wrap the cable around the respective cover, insert the power supply into the bottom cover, and put the top cover on top. Slide the band onto the two assembled covers. See pictures if anything is unclear.

Tags