USS Label organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable organizer for labels...and other stuff
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep your labels in one place.
So with announcing the printable labels for Prusa USS Drybox, I decided to create a stackable organizer for those labels.
If you are using more than one drybox and more than one material, this organizer can help you manipulate with labels and know, where to find the one you need.
Print the base and have all labels together, or make a stack for each type, differentiate them by color, or add text, you can customize it for your preferences.
No supports needed
Every model is designed to be printable without any support.
What models are here?
Base
Available in two heights. Short for "low profile" and long with added space for labels or text.
Base Empty
If you are feeling a little messy with labels, or decide to store something else, you will find these models handy. You can choose between empty organizer, or with the spacer in between.
Stack
The most universal organizer of all. Can contain up to 20 labels and even be stacked on another stack or bases.
Top
A top cover to...well...covering it all together :-)
Printing
The models were tested on Prusa XL and Prusa CORE One L
Profile 0.2 Speed, 2 perimeters, 15 grid infill
Material: PLA
Notice
These organizers were designed to have a slight resistance while putting them together and remove them apart, however this is very dependent on what material is used. Even different types of PLA can behave differently. If you find it hard to separate the models, try to change their size to 101% or more if needed.