Tablet and Phone Clamp Stand / Holder for Treadmill with Adjustable Angle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Brief instructions: Use support for the tablet holder object. Don't use support for the small parts
Two files to print
1- Small parts (Print_Arranged_Small_Parts.stl / Print_Arranged_Small_Parts SHORT CLAMP)
2- Stand (Print_Holder_Tablet_Phone.stl / Print_Holder_Tablet_Only.stl)
I arranged the small parts so they can be printer in one run.
Small parts are uploaded individually including shorter screws and shorter clamps that you can arrange for printing yourself.
I used 0.2 layer height and 20% infill. Higher infills for screw and clamps make sense.
Printing the small parts
Slow down the first layer to 15 to help with adhesion of screw threads
No support is needed if your printer can bridge the screw holes.
Removing supports from screw holes is a lot of hassle.
Printing the holder/stand object
Use support as its needed for the lip.