1 / 8
Tablet and Phone Clamp Stand / Holder for Treadmill with Adjustable Angle — image 1
1 / 8

Tablet and Phone Clamp Stand / Holder for Treadmill with Adjustable Angle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Brief instructions: Use support for the tablet holder object. Don't use support for the small parts

Two files to print
1-  Small parts (Print_Arranged_Small_Parts.stl / Print_Arranged_Small_Parts SHORT CLAMP)
2- Stand (Print_Holder_Tablet_Phone.stl / Print_Holder_Tablet_Only.stl)

I arranged the small parts so they can be printer in one run.

Small parts are uploaded individually including shorter screws and shorter clamps that you can arrange for printing yourself.

I used 0.2 layer height and 20% infill. Higher infills for screw and clamps make sense.

 

Printing the small parts
Slow down the first layer to 15 to help with adhesion of screw threads
No support is needed if your printer can bridge the screw holes.
Removing supports from screw holes is a lot of hassle.

Printing the holder/stand object

Use support as its needed for the lip.