1 / 5
The Filter DC Jack Mod for new GDSTIME 8500rpm fan — zdjęcie 1
1 / 5

The Filter DC Jack Mod for new GDSTIME 8500rpm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mod for the "new" GDSTIME 5015 fans with the bigger outlet and 8500rpm.

Ocena
0 / 5
Polubienia
10
Pobrania
16
Wydruki
0
Wyświetlenia
258
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Well, I bought new bed fans and didn't look closely at the listing. I got the "new" GDSTIME 5015 fans with 8500rpm. They have a different, bigger air outlet and makes them incompatible with the existing "The Filter" variants. The listing calls them " 24V Ball 8500RPM New" I have previously used the DC jack mod and like it a lot. So here is a mod for it that fits these fans:

With my bed heater it takes about 13 minutes from 21°C to 40°C and about 38 minutes from 21°C to 50°C chamber temp.

I used some heat shrink solder connector to connect the wires. Printed in The Filament ASA-CF black.

EDIT 11.08.2026:

Added the lids.

EDIT 05.10.2026:

Fixed the clearance around the right side fan.

EDIT 06.10.2026

Added a middle version with a screw to hold the lid down. I have some warping issues with the lid. You need a standard Voron heat insert and a M3x6 BHCS.

Tagi