OnePlus 15 AirVooc Charger Stand, BETA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An overkill stand for the Airvooc charger for Oneplus Phones with wire channel.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This project ended up in permanently "Under Development". I started it when I had the phone, then I had to get rid of it. Hopefully it works, but I have no way to verify it does. I still wanted to share the project just in case someone was interested.
If you want to try it and see if it does work with the OnePlus 15, be my guinea pig. If you want to give me feedback on whether it works or not, that would be fantastic! :) Then I can remove the Under Development thing.
It is best to use Tree Supports for the very small overhangs, there are some tight tolerances.
The wire channel to place the wire was only tested with the cable that came from the manufacturer, ( that red one that came in the box ).
I included two files for the Slide Base. One of them has the letters removed from the model already. The other one has the letters in the model, but it needs to cut into "Parts" in your slicer so you can do a multi color by manually selecting the parts and changing the filament color of the parts only. There are plenty of tutorials on this on Youtube, but if you don't want to look it up, or still not sure, you can message me :)