Nikon F3 Shutter Testing Back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds down the frame counter switch on the back so shutter speeds faster than 1/60 can be tested with the back open.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
This model solves the issue of not being able to fire shutter speeds faster than 1/60s on the Nikon F3 while the camera back is open.
This is particularly useful when trying to measure shutter speeds using a shutter tester that requires the back to be open for a sensor to be placed at the film plane.
Printed in PLA with an infill of 30%. Used a brim. Requires supports. The bottom in the STL is intended to fit into the top portion of the camera back.
The fitment is such that the model can be friction fit against the frame counter switch, so no need to continuously hold it in place.