1 / 8
Vacuum Tube Stand - KT88 - EL34 - 12AX7 — zdjęcie 1
1 / 8

Vacuum Tube Stand - KT88 - EL34 - 12AX7

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Set of stands for KT88, EL34 and 12AX7 tubes. A design element for audio and Hi-Fi enthusiasts.

Ocena
5 / 5
Polubienia
0
Pobrania
24
Wydruki
1
Wyświetlenia
98
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

This is a modular display system designed for tube enthusiasts and audiophiles. I have created two specific bases (60x60 mm) for elegant presentation of different types of tubes: Noval base (for 12AX7) and Universal Octal base with stepped internal design (for KT88, EL34 and similar).

Assembly Instructions

  • The model is a single-piece print, so no complex assembly is required.

  • Prepare the base: After printing, ensure the pin holes and the central keyway are clear of any tiny filament strings.

  • Insert the tube: Gently align the tube pins with the hole pattern. For the Octal base, make sure the center key aligns with the internal slot.

Print Settings

  • Material: PLA or PETG

  • Layer Height: 0.15mm or 0.2mm (for smooth curves on the fillets).

  • Infill: 15-20% (Gyroid is best for a bit of weight and stability).

  • Walls: 3 perimeters to ensure the pin holes are sturdy.

  • Supports: No supports needed.

Tagi