1 / 8
Vacuum Tube Stand - KT88 - EL34 - 12AX7 — image 1
1 / 8

Vacuum Tube Stand - KT88 - EL34 - 12AX7

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Set of stands for KT88, EL34 and 12AX7 tubes. A design element for audio and Hi-Fi enthusiasts.

Rating
5 / 5
Likes
0
Downloads
24
Makes
1
Views
98
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

This is a modular display system designed for tube enthusiasts and audiophiles. I have created two specific bases (60x60 mm) for elegant presentation of different types of tubes: Noval base (for 12AX7) and Universal Octal base with stepped internal design (for KT88, EL34 and similar).

Assembly Instructions

  • The model is a single-piece print, so no complex assembly is required.

  • Prepare the base: After printing, ensure the pin holes and the central keyway are clear of any tiny filament strings.

  • Insert the tube: Gently align the tube pins with the hole pattern. For the Octal base, make sure the center key aligns with the internal slot.

Print Settings

  • Material: PLA or PETG

  • Layer Height: 0.15mm or 0.2mm (for smooth curves on the fillets).

  • Infill: 15-20% (Gyroid is best for a bit of weight and stability).

  • Walls: 3 perimeters to ensure the pin holes are sturdy.

  • Supports: No supports needed.

Tags