Search results: hifi

Counting matching models…

Printables

Headphone Stand for Hifiman EF500 DAC/Headphone amp

Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file

Order a print of this model

Printables

Hifi Speaker Feets (compatible Geneva speaker)

A small model for my Geneve XL. Designed for the original countersink screws that came with the stand. I wanted to replace the stand with small feet to have the projector a bit lower. I used the 30 mm version with the original power cord.…

Order a print of this model

Printables

Twiggy Hifi Lautsprecher

Ich hatte die Twiggy vor 2 Jahren aus Holz gebaut. Dabei ist mir die Schallwand schlecht gelungen und ich hatte das Gehäuse nie lackiert. Im Rahmen eines anderen Lautsprecherbauprojektes habe ich das Holz für neue Twiggy Gehäuse…

Order a print of this model

Printables

Satyr 4 (DIY HiFi Headphones)

Satyr 4 What makes this headphone Hi-Fi? SCIENCE! I spent quite a while finding the optimum combination of tuning materials and geometry to bring you the Satyr 4. This 3D printable headphone design easily beats out all of its competition…

Order a print of this model

Printables

HifiBerry Amp 2 / RaspberryPi 3A small upright amplifier

I printed this on a Prusa Mini using Inland PLA+. It's designed to be easy to print. Set the base flat and right side up, supports suggested for the base insets for the rubber feet. Set the cover upside down. Generate supports at…

Order a print of this model

Printables

Hifiman HE4xx earpad conversion kit for regular earpads (parametric model)

Simple printable adapter ring for Hifiman HE4xx (HE400se, HE400i, HE400S) that allows mounting standard round earpads (e.g. 100–110 mm aftermarket pads like Dekoni, Brainwavz, Yaxi, etc.). Replaces stock mounting system → easier pad…

Order a print of this model

Printables

MayAudio Aether (DIY Hifi/Gaming Headphone)

Hifi Open-back Headphone using high quality 50mm drivers. The goal of this headphone was to make something bright, open and soundstagey sounding. Akin to Hifiman headphones but sounding more lively. Treble is smoothly elevated, and bass…

Order a print of this model

Printables

Custom Grills for HIFIMAN HE6se / HE400se (3 Types)

Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…

Order a print of this model

Printables

Hifiberry Case

HiFiBerry Player If you enjoy listening to music you will really love this tiny music player! The player consists of: RaspberryPi 3B+ or RaspberryPi 4* HiFiBerry DAC+ PRO or HiFiBerry DAC-2 PRO (added 22 Jule 2025) Additional accessories:…

Order a print of this model

Printables

Raspberry Pi Zero HiFiBerry MiniAmp Case

This is the case for one of my Snapcast clients. It houses a Raspberry Pi Zero W and a HiFiBerry MiniAmp . The Raspberry Pi Zero 2 W has the same footprint and will also fit. I only need the PWR IN micro USB, but I have added versions of…

Order a print of this model

Printables

Hifiberry DAC2 PRO XLR Case

Caja para Raspberry Pi3B con Hifiberry DAC2 PRO XLR

Order a print of this model

Printables

Hifi Absorber Feet

These printable HiFi absorber feet are designed with the spike principle in mind. They have been tested and are currently in use with HECO Superior 840 speakers, which weigh 19 kg each. This specific design can only be achieved through 3D…

Order a print of this model

Printables

Hifiman HE pentagram/star grille mod for headphones

Pentagram Grille Mod for Hifiman HE6SEv2 Headphones Introduction Hifiman HE6SE v2 headphones, as well as other Hifiman HE-series headphones that share the earcup design (at least HE400), benefit from the “grill mod”, i.e., either removing…

Order a print of this model

Printables

HiFiBerry Touch

Hi Everyone, Time for my next project to publish. It's called: HiFiBerry Touch. This Boombox is designed in Fusion 360. It contains a 24V 12000 mah rechargeble battery and MoOde audio software. https://moodeaudio.org/ Please press on the…

Order a print of this model

Printables

Hifiman HE400SE Grills

Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…

Order a print of this model

Printables

HifiBerry DAC+ Pi4 remix

As this is a remix, please refer to the original for most instructions. Here I only detail my changes. I suggest you do not print my files, but instead download the SCAD file and use OpenSCAD to export your own print files. See Caveat…

Order a print of this model

Printables

Hifiman HE560 earpad spacer

After recently purchasing a set of used Hifiman HE560 headphones, I found that after a while the inside of the drivers was pushing on the outside of my ears. A simple solution is to add a little space between the driver and pad, which is…

Order a print of this model

Printables

Porsche 993 HiFi Speaker Pod for 6.5" Woofer and 3" Mid

Designed this for Alpine R series 6.5" woofer and 3" midrange speakers. But, may work for other speakers with same bolt pattern. The pod retains the factory speaker angles relative to the door, but adjusts the depth to provide clearance…

Order a print of this model

Printables

Hiby R1 HiFi Player TPU case

Made a case for my Hiby R1 All buttons are tactile, so you can continue to use them without looking All icons on buttons are the same Made 9 versions to make to this state Printed with Esun TPU 95A on BambuLab X1C There can be some…

Order a print of this model

Printables

NWBI/Newbietronics Open Speaker (3.5 + 1 inch version) HiFi Bookshelf Speakers, Speaker enclosures

Introducing the Open Speaker, a pair of passive driven bookshelf speakers. The model was designed to be easily remixed according to your needs. But even if you don't know how to design, it works great out of the box! It is a basic sealed…

Order a print of this model

Printables

Bushing for Hifiman HE560 (v1) headphones

Do not use vase or spiraling contour mode. Print at slow speed. As mentioned in the title, these bushings are for the Hifiman HE560 v1 model.

Order a print of this model

Printables

Hifiman Edition XS yokes

Hello, Custom yokes for the Hifiman Edition XS if you want to mod you headband. Might require some extra tuning after print for the screw holes of headband connection. Uploaded are two versions. -Ver 1 is without extra material and might…

Order a print of this model

Printables

HifiMan Volcano Grill for HE6 HE-500 etc.

Volcano Grill for HiFiMan HE-500, HE6 etc. for more open sound stage. Does fit the original retention ring without issues. Prints without supports.

Order a print of this model

Printables

Headphone Stand for Hifiman EF500 DAC/Headphone amp

Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file

Order a print of this model

Printables

Satyr 3 (DIY HiFi Headphones)

Designed by a Professional What makes this headphone Hi-Fi? SCIENCE! I spent quite a while finding the optimum combination of tuning materials and geometry to bring you the Satyr 3. This design beats out all of its competition in the…

Order a print of this model

Printables

Hifiman HE400SE Bass Bosst Earpad adapter.

Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…

Order a print of this model

Printables

HIFIMAN HE400SE Headphone Stand

This is a headphone stand i modeled to fit my HIFIMAN HE400SE headphones. It can print without support. I printed mine on my Creality k2+ in PLA-CF. I included the F3d archive so you can modify the design. I included 2 versions, one that…

Order a print of this model

Printables

Case for Pi Zero + pHAT DAC / Hifiberry DAC+ Zero

A Case for Pi Zero + pHAT DAC or Hifiberry DAC+ Zero.

Order a print of this model

Printables

Raspberry Pi Zero W/WH Waveshare Ethernet POE with Pi HiFi DAC Mini HAT PCM5122 HiFi DAC Case

added a Raspberry Pi HiFi DAC Mini HAT PCM5122 HiFi DAC to the case, I am using as a audio player.

Order a print of this model

Printables

CAR HIFI Port

Zweiteilige Port , die verklebt werden müssen . Innen Durchmesser 10cm und gesamt länge 20cm. Die Vier Verschraubung Löcher sind 4,2 mm D.

Order a print of this model

Printables

InnoMaker Raspberry Pi HIFI DAC HAT PCM5122 Case for raspberry pi zero w

This is an inno-maker usb-dac case. Optimized for raspberry pi zero w. You need M3x8 (or M3x12) hex head screw x 4 M3 din562 square nut x4 Details of usb-dac https://www.inno-maker.com/product/hifi-dac-hat/ Enjoy your Volumio life. Print…

Order a print of this model

Printables

hifi-esp32

This is a slim case for hifi-esp32 boards by Sonocotta. It won't fit the LAN version without modifications. Print both sides, place the board and close. For me the friction fit was good enough.

Order a print of this model

Printables

Raspberry PI 5 + NVME Base + HifiBerry DAC2 Pro Case

I build a Volumio Player with the following items: Raspberry PI 5 pimoroni NVMe Base for Raspberry Pi 5 HiFiBerry DAC2 Pro (No Affiliate links whatsover) I could not find a suitable Case, that is why I created my own :) Not perfect, but…

Order a print of this model

Printables

HiFi H2 WALKER mp3 player case cover

print it in TPU or other soft filament!

Order a print of this model

Printables

HifiBerry DAC+ ADC (Pro) case for RPi5

This is a case to protect a Raspberry Pi 5 with a Hifiberry DAC+ attached to it. Print it on the side with the lid resting on the print plate. I printed mine with support inforcers for the ports overhang (ethernet, usb and sd card slot).

Order a print of this model

Printables

Benchy 13: Dummy 13 benchified!!!

Assembly: Use my new frame, it has all the parts you need, and use my benchified armor. assemble as normal Dummy 13. Printing: You had better use supports.

Order a print of this model

Printables

Headphone Stand compatible with Hifiman Deva Pro Wireless and other audiophile headphones

I wanted to print a headphone stand for my Hifiman Deva Pro Wireless, but there doesn't seem to be any models made particularly for it. So I turned to generic headphone stand designs, with my two requirements being (1) the headphones must…

Order a print of this model

Printables

HifiBerry Case Cover Flat Hex

This is an alternative cover for Stamos' HifiBerry Case . I did like the case a lot but wasn't quite happy with the 2 cover options, so I decided to do an alternative design. Print Settings Supports: Yes Resolution: 0.2 Infill: 20%…

Order a print of this model

Printables

High-End Hifi Speaker Tripod von German Precision Audio

High-End Compact Speaker – 3D Printable Enclosure & Base (TangBand W655 Compatible) This premium 3D model includes both the speaker enclosure and base, designed by German-Precision-Audio.de It’s engineered specifically for the TangBand…

Order a print of this model

Printables

Hifi Speaker Feets (compatible Geneva speaker)

Order a print of this model

Printables

Hifiman Arya Cable Holder

Helps hold the 3.5mm cable for any Hifiman Arya's with loose connectionsHelps hold the 3.5mm cable for any Hifiman Arya's with loose connections

Order a print of this model

Printables

Mini Hifiberry Touch

Author : ineiub https://www.thingiverse.com/thing:4214266 I had to redraw the main console because I used a slightly larger screen. I added bindings for the raspberry PI, I modified the rear cover to add a switch and a light for the power…

Order a print of this model

Printables

Hifiman HE400SE Grilles used with Original Ring

The height of the base has been reduced by 0.2mm, enough for 2 layers on the bottom. This allows it to be used easily with the original retention ring. However, it could be a user error on my end. On the original model, the nubs could be…

Order a print of this model

Printables

Protective case for HiFiMan Edition XV housing

Printer: Ender 3 V1 with direct drive mod Slicer: Orca Slicer 2.3.0 Print settings: 0.2 mm layer height, 100% infill, no brim, skirt Material: eSUN PLA+

Order a print of this model

Printables

Raspberry Pi 3 B+ Hifiberry Amp+ Case

Thought the case is neat, but I rather like to use the B variant, so I redesigned the case a bit. m3 Bolts are used to secure both shell parts together. I've used a random 30x30x10mm Fan from amazon. Cheers Print Settings Printer Brand:…

Order a print of this model

Printables

In-Between hifi Lautsprecher D.A.U.

Anbei der Link zur Seite der Entwickler mit Bauplan: https://www.der-akustische-untergrund.de/speakers/projects-for-beginners/in-between/ Um das aufwändige Fräsen der Schallwand zu vermeiden, wurde diese 3D gedruckt. Ebenso der Teiler im…

Order a print of this model

Printables

ESP32-HIFI

Remixed this case to make the aperture of the headphone jack and USB bigger. Removed the antenna

Order a print of this model

Printables

Twiggy Hifi Lautsprecher

Order a print of this model

Printables

HiFi Walker H2 Stand

HiFi Walker H2 Stand This is a simple model stand your favorite HiFi Walker H2 music player up right while connected to your stereo. A right-angle 3.5mm adapter is inserted from below into the stand which serves as connector to the stereo…

Order a print of this model

Printables

Dual CL 380 HiFi Speaker Replacement Control Knob / Ersatzdrehknopf Dual CL380

I needed a replacement for the rotary control knob on a Dual CL 380 speaker. Since I couldn't find one, I designed one myself in Fusion 360. It fits perfectly at a layer height of 0.08 mm (0.4mm Nozzle), and you can hardly see the…

Order a print of this model

Printables

HiFi Speakers Pendulum Stand : Vibration decoupling system (Watch the video)

This unique pendulum-based loudspeaker decoupling system employs suspended support stands designed to fully isolate the speaker cabinet from the table/floor. By allowing free, controlled oscillation in multiple axes, the pendulum…

Order a print of this model

Printables

Raspberry PI 4B & HIFI Berry DAC+Pro Case

Description I adapted the design from 0110-M-P ( https://www.thingiverse.com/thing:922740 ) to hold a Raspberry Pi 4B in combination with a Hifi Berry DAC+Pro. I use it for music and radio streaming in my office. As an audio-player I…

Order a print of this model

Printables

Hifiman yoke for Capra Headband v3

Simple yoke made for my Hifiman Ananda Stealth to use with the Capra Headband v3. To use with the stock screws from how the stock headband is secured, but you can use your own. Print with PETG. Link to the Capra Headband v3 made by Brian:

Order a print of this model

Printables

Case for Hifiberry and Raspberrypi Zero 2 W

Fits the stack of these items: Raspberry Pi Zero 2 W ( https://www.raspberrypi.com/products/raspberry-pi-zero-2-w/ ) HifiBerry DAC2 Pro ( https://www.hifiberry.com/shop/boards/dac2-pro/ ) HifiBerry AAmp60 (…

Order a print of this model

Printables

Satyr 4 (DIY HiFi Headphones)

Order a print of this model

Printables

MayAudio Sword (DIY Hifi Headphone)

Hifi Open-back Headphone using high quality 50mm drivers. The sound is very accurate to the 10dB tilt Diffuse Field kb501x target. The goal of these headphones was to make an HD6XX-esque sound without treble peaks and more subbass. The…

Order a print of this model

Printables

MayAudio Knight (DIY Hifi Headphone)

Hifi Closed-back Headphone using 50mm drivers. The sound is v-shaped, sharp, detailed and deep. Isolation is very good. Made to work with any headband, headphone diameter is 86mm. Parts: - Headband:…

Order a print of this model

Printables

HifiBerry Amp 2 / RaspberryPi 3A small upright amplifier

Order a print of this model

Printables

HifiBerry Amp 2 / RaspBerry Pi 3A compact upright amp V2

My earlier model worked fine, but was tricky to assemble. And I thought I could clean up the SketchUp artifacts and reduce the size even further. Well, this is still a little tricky to assemble but does not require any hardware or a snap…

Order a print of this model

Printables

Hifiman HE4xx earpad conversion kit for regular earpads (parametric model)

Order a print of this model

Printables

MayAudio Aether (DIY Hifi/Gaming Headphone)

Order a print of this model

Printables

HiFi ESP32-S3 Plus case

This is a slim case for hifi-esp32-s3-plus boards by Sonocotta with the infrared receiver and external antenna. It won't fit the LAN version without modifications. Print both sides, place the board and close. For me the friction fit was…

Order a print of this model

Printables

BA100 HiFi audio amplifier table bracket

This bracket is designed to mount a hi-fi amplifier under a table. Without gaps Can be placed on any surface. Mounting holes - 5mm. PETG plastic Perimeters - 3 filling - 15% layer - 0.2 Use supports.

Order a print of this model

Printables

HIFIMAN Ear Pad Mounting Ring

Ear pad mounting ring for Hifiman headphones. The model fits similarly to the original. The design is slightly different to the original due to the differences in material properties. This model is meant to be printed with PLA. Update:…

Order a print of this model

Printables

Custom Grills for HIFIMAN HE6se / HE400se (3 Types)

Order a print of this model

Printables

Hifiman Egg-shaped Headphone Stand (HE1000/Arya/Edition XS)

I wanted to create a printable version of the included foam stand that Hifiman provides with their egg-shaped headphones. I traced the original foam and created a 3D model, added a little hanger for the headphone cable. Print settings:…

Order a print of this model

Printables

Pieds 50mm pour appareil HiFi ou autre.

Pieds de 50 mm × 12 mm pour appareil Hi-Fi ou autre. Pad antidérapant à imprimer en TPU ou dans toute autre matière de votre choix. Pour du multicolore : hauteur de couche : 0,16 mm changements de couleur aux couches : 26 32 45 51

Order a print of this model

Printables

Panel for HiFiBerry DAC2 Pro for modular Raspberry Pi 4 case

This is a simple modification of the original model from the " Modular case for Raspberry PI4 and an HiFi hat (Audiophonics, Hifiberry) or 1-wire " to add support for the HiFiBerry DAC2 Pro.

Order a print of this model

Printables

RubberDACy, a case for Raspberry Pi 4 and Touchscreen 7" Hifiberry DAC2 HD hat and Apple Superdrive

RubberDACy, a Hifiberry concept case.. Hi, this is my first dive into 3D modelling and complete 3D printing project that met my needs. I couldn't find a complete Hifiberry case that included support for the 7" touchscreen and thankfully…

Order a print of this model

Printables

Raspberry Pi 4/5 HifiBerry Amp Case

A Case for a Raspberry Pi 4 or 5 with the HifiBerry Amp 4 hat. Space for the speakerwire and power with screw access

Order a print of this model

Printables

Hifiman HE400S headband

My original leather headband broke and i didn't really want to look for a replacement online, so i printed one instead, seems quite comfortable on my head. I made it quite wide to try and minimize the "headphone dent" problem, seems to…

Order a print of this model

Printables

Modular case for Raspberry PI5 and an HiFi hat (Audiophonics, Hifiberry) or 1-wire

Maturity: Good 2 prototypes. In use since 2026/06. Model design from scratch. Hardware: Hat spacers are 11mm height (as Adafruit quotes Nigel Tufnel's “These go to eleven”). The part “PiAndHatCase-rxx - Entretroise” is if you missing some…

Order a print of this model

Printables

HiFi-ESP32 Case with Ethernet

This is a case for the HiFi-ESP32 board that will fit the W5500 Ethernet (LAN) module for wired connectivity. I couldn't find any existing cases that fit the LAN module. There are two "Top" models included - one with a simple speaker…

Order a print of this model

Printables

Dayton Audio MK Kit - Pair of HiFi speakers using 3D printed enclosures

MK Kit 3D-Printed Bookshelf Speaker Enclosures The MK Kit 3D-printed enclosure files give builders a clean, printable cabinet option for the Parts Express MK Kit Pair - Components Only package . This design was created specifically for…

Order a print of this model

Printables

Hifi fod,

Hi-fi foot with 5mm screw, O-ring used for scratch and slip protection. O-Ring size: 22X2mm

Order a print of this model

Printables

HIFIMAN yoke (HE400i)

replacement yoke for Hifiman HE-400i

Order a print of this model

Printables

HiFiMAN Dust Caps

Simple dust covers for HE400se headphones. If you have any furry friends (dogs, cats etc.) in your home this is a must have. Material/Temperature TPU @ 235 °C Nozzle 0.4 mm Layer Hight 0.2 mm Top/Bottom Layers 4/4 Speeds…

Order a print of this model

Printables

Hifiberry Case

Order a print of this model

Printables

HiFiBerry Amp2 case for raspberry pi 3

A 3D printable case for HiFiBerry's Amp2 connected to a raspberry pi 3 using the included off stands. With a thin shell and form fitting to the raspberry pi. Used running the HiFiBerryOS and to connect to separate speakers. I contemplated…

Order a print of this model

Printables

HiFiBerry Amp2 case for raspberry pi 4

A 3D printable case for HiFiBerry's Amp2 connected to a raspberry pi 4 using the included off stands. With a thin shell and form fitting to the raspberry pi. Used running the HiFiBerryOS and to connect to separate speakers. I contemplated…

Order a print of this model

Printables

Printable mini HiFi

Here my little HiFi project. I must say that I am very satisfied about this. I started this Project to recycle some components that I had, but I didn't imagine it would become so satisfying. It consists of a Raspberry pi 3 b, 7" lcd,…

Order a print of this model

Printables

Desk Mount For BRZHiFi TPA3116 Mini Amplifier

Just a super simple underneath desk mount for the BRZHiFi mini amplifier. There are many mini amplifiers manufactured in China that are the same dimensions, so this mount probably fits many of these also. Requires 4x small screws to mount…

Order a print of this model

Printables

HiFi-Pi

Still searching for a Headless Raspberry Pi case for your Pi with Display / Volumio-Pi / MPD-driven mediaplayer? Here it is: The HiFi-Pi! = The HiFi-Pi-Case is a Case which snaps together, is suitable for wall-mounting, has it's I/O on…

Order a print of this model

Printables

Odroid C2 with Hifi Shield case

Odroid C2 Hifi Shield Case Note: If you like my design feel free to leave a tip. It will help me fund the filament used to iterate on my designs. Description This is a case I designed to house the Odroid C2 from hardkernel as well as the…

Order a print of this model

Printables

Raspberry Pi + HiFiBerry XLR Streamer with 7" Touchscreen (Wall Mounted)

Items needed: Raspberry Pi 3 or 4 Raspberry Pi 7" Touchscreen HiFiBerry DAC2 Pro XLR Some plastic threading screws or you could add threaded inserts whatever you prefer. Easily adaptable for other DACs by modifying the connection box.…

Order a print of this model

Printables

Case for Raspberry Pi Zero with HifiBerry MiniAmp

This is a case for Raspberry Pi Zero with a HifiBerry MiniAmp hooked up on top. It was made with my “Parametric Case” Model. Use M2.5 screws to fix the stack at the lid or the case. Lid and Case have a (very tight) snap-fit. Usually it is…

Order a print of this model

Printables

Speaker cable lifters for Hifi

Order a print of this model

Printables

Speaker cable lifters for Hifi v.2

Order a print of this model

Printables

Raspberry Pi 7" TouchScreen & Rpi 4B Enclosure mount - HiFi player remix

I was looking for a Raspberry PI 7" display case for a HiFi player like Volumio, moOde, rune audio etc. I liked the E-Raw version, specifically designed for a 3D printer project. I initially modified it to make it freestanding. Then I…

Order a print of this model

Printables

Geekworm X302 HiFi DAC HAT Enclosure

This enclosure was designed to fit the Geekworm X302 DAC board for the Raspberry Pi Zero W / Zero 2 W. I dimensioned the internal space using the Geekworm PCB drawing found here with a +.2mm tolerance on all 4 sides. For my board, it was…

Order a print of this model

Printables

HiFiBerry 19" audio rack case

krabičky pro Raspberry Pi + HiFiBerry board + XLR neutrik konektory https://rpishop.cz/brand/9-hifiberry

Order a print of this model

Printables

HiFiBerry Case Cover for the HiFiBerry Digi+

Cover for the HiFiBerry Case when used with the HiFiBerry Digi+ Print instructions Print all parts except the cover from the original design.

Order a print of this model

Printables

HIFI Media Player (Volumio)

This is just the front and back panel for the Small Media Player made by Tobias Scharmann I wanted to create my own media player based on his pictures, but I didn't want to pay the $90+ cost to machine the front and back panels he made…

Order a print of this model

Printables

Case for Amanero and Hifi Shield 2 DAC

This case was made to cover Amanero USB to I2S and HiFi Shield 2 DAC for Odroid. https://amanero.com/ https://www.hardkernel.com/shop/hifi-shield-2/ Printed on default settings via Cura3D on Ender 3. Case does not need any screws, You…

Order a print of this model

Printables

Support mural (Wall mount) pour Hifiberry Case (par Stamos)

Imprimé en 0.2, dans le sens dans lequel le support est présenté sur les photos (debout). Je modélise tous mes modèles de manière à ce qu'ils soient imprimables avec une imprimante à filament (FDM).

Order a print of this model

Printables

Hifiman Arya Stealth wall holder

Headphone holder for Hifiman Arya Stealth. Will also work with many other headphones as well. I used eSUN PLA+ with 40% infill. No supports. No raft.

Order a print of this model

Printables

Case for Inno-Maker Rpi HiFi AMP Hat and Raspberry Pi Zero W

This is a simple case for the Inno-Maker Rpi HiFi AMP Hat and Raspberry Pi Zero W. To assemble, simply mount the Inno-Maker hat on the pi Zero. Place the mated circuit boards into the case bottom. Finally, snap on the lid. This model does…

Order a print of this model

Printables

HiFi Shock Absorber / Vibration Damper

This vibration damper can help to reduce unwanted vibrations on loudspeakers and other devices. Put one of them on each corner of your device. Print with max. 0.20mm layer height and use a softer material like TPU (hardness should be…

Order a print of this model

Printables

Raspberry Pi Zero HiFiBerry MiniAmp Case

Order a print of this model

Printables

Server Power-Supply Plug for CAR-HIFI

Server power-supply plug Why to use: Sometimes you have an old speaker and an unused car hifi amplifier laying around in your house or flat. You can use this parts for a home amplifier with speakers and play music from sources like your…

Order a print of this model