MayAudio Knight (DIY Hifi Headphone)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY Hifi Closed-back Headphone using high quality 50mm drivers. Designed in Finland.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 37
- Makes
- 2
- Views
- 325
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hifi Closed-back Headphone using 50mm drivers.
The sound is v-shaped, sharp, detailed and deep. Isolation is very good.
Made to work with any headband, headphone diameter is 86mm.
Part | Link |
|---|---|
3D printable headband | |
Yokes for the 3D printable headband (Satyr 2 Yoke Left + Right in the NEW one) | |
Earpads | |
Driver (buy two) | |
Heat inserts | |
Micropore tape | |
Dekoni foam kit | |
Sockets | |
Internal wires | |
M3 screw set (you need 3 6mm screws, 4 10mm screws and 2 12mm screws + 4 10mm screws for the headband) | |
PLA Filament (use any decent PLA) | |
Cable (2x3.5mm) |
Assembly instructions: https://github.com/Maja5Dev/MayAudio-Knight/blob/main/Assembly%20instructions.md
Designed in Finland.
Join our discord server: https://discord.gg/FM5Sw2YNhX
Support us on kofi: https://ko-fi.com/maya224696