1 / 5
Raspberry Pi Zero HiFiBerry MiniAmp Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cassette style case housing a Raspberry Pi Zero (2) W and the HiFiBerry MiniAmp.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 1
- Views
- 554
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is the case for one of my Snapcast clients. It houses a Raspberry Pi Zero W and a HiFiBerry MiniAmp. The Raspberry Pi Zero 2 W has the same footprint and will also fit. I only need the PWR IN micro USB, but I have added versions of the bottom part that expose the other connectors.
- No supports required
- Print lid upside down
Installation
Insert the Pi with the connectors first from diagonally above and let the rear part fall into place. Then attach the MiniAmp with the GPIO headers. There is no need for spacers, because the front part of the MiniAmp is supported by the housing.