1 / 5
Raspberry Pi Zero HiFiBerry MiniAmp Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the case for one of my Snapcast clients. It houses a Raspberry Pi Zero W and a HiFiBerry MiniAmp. The Raspberry Pi Zero 2 W has the same footprint and will also fit. I only need the PWR IN micro USB, but I have added versions of the bottom part that expose the other connectors.
- No supports required
- Print lid upside down
Installation
Insert the Pi with the connectors first from diagonally above and let the rear part fall into place. Then attach the MiniAmp with the GPIO headers. There is no need for spacers, because the front part of the MiniAmp is supported by the housing.