Mount for low fender on the BTM Wildfire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for mounting the original Fender low just above the tire
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Created this mount for increased splashwater-protection as the original mounting situtation for the fender did not provide enough.
This will hold the fender just above the tire as it is held down on the movable part of the fork and will consequently move with the tire.
BOM:
3xM8x250 threaded rod
1xM8x245 threaded rod
20xM8 nuts
8xM8 washers
4xM8x30 cylindrical head
2x187,5mm pneumatic pipe with >8mm ID
2x47,5mm pneumatic pipe with >8mm ID
1xFender(i took the original one which already had 4 fitting holes)
4xM6x10 flat head screws
4xM6 nuts
This is at the moment only for the 33mm variant of the fork and not yet for the new 37mm version.