Profitec Go iPad Mini 4 / Tablet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lid-mounted holder for the Profitec Go espresso machine, designed to hold an iPad Mini 4 or tablets up to 7mm thick.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This holder screws onto the top lid of the Profitec Go espresso machine. Although it is designed specifically for the iPad Mini 4, it is compatible with any tablet or smartphone with a maximum thickness of 7 mm. It is ideal for following recipes or watching shot timers while brewing.
Print Settings
Material: PETG, ABS, or ASA (Mandatory due to high heat from the espresso machine)
Layer Height: 0.2mm
Infill: 30%
Walls/Perimeters: 3-4 (For clip tension and structural rigidity)
Supports: Only required if your printer struggles with short bridges/overhangs.
Hardware / Assembly
No hardware required.
Installation: Slides or clips directly onto the rear/side edge of the top lid. Ensure the tablet is centered to maintain balance on the machine.