Wavershare 5" HDMI Mercury One.1 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable mount for the Waveshare 5" HDMI panel to fit a Mercury One.1
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Have you ever wanted to use a 5" Waveshare HDMI screen on a mercury one but found that you had to compromise between how far it sticks out and and how tall the skirt is? No? Just me?
This is the first case I made with the intention of not having to modify the stock skirt and be as modular as possible. It uses my skirt pass through model here:
BOM:
- 15x M3x4x5 brass heatset inserts (3 for the skirt, 12 for the case)
- 8x SHCS or BHCS M3x8 screws. I think the SHCS look better, chonky.
- 4x SHCS or BHCS M3x5 screws to mount the LCD internally.
- 3x SHCS M3x12 screws for the hinge mount
- 3x M3 washers for the hinge mount (optional)
- 1x SHCS M8x70 for the hinge
- 1x M8 Hex nut for the hinge
I'd also recommend right angle cables for the HDMI and Micro-USB cables, although straight will work just fine too.