Qidi Box Snag Cutter Filament Drying Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small piece to insert into the snag cutter base to prevent the head piece to dig into the spool while drying.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 1141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a small additional piece for the Qidi Box snag cutter base made by RVfan.
Before I made this upgrade, I either had to half disassemble the cutter arm or do some really janky stuff to keep the cutter's head piece from digging into the spool while drying filament
I had two spools ruined by that so I set out to find a solution. This piece slides into the base and should stay there relatively easy. If yours slips out easily scale it up somewhere beween 0-1% added size.
I printed mine in the same ASA as the snag cutter.
Printed with 0.2mm layer height, 20% infill with fill multiline set to 2, and tree supports for the overhang part.