Qidi Box Snag Cutter Filament Drying Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small piece to insert into the snag cutter base to prevent the head piece to dig into the spool while drying.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 100
- Makes
- 0
- Views
- 1,186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a small additional piece for the Qidi Box snag cutter base made by RVfan.
Before I made this upgrade, I either had to half disassemble the cutter arm or do some really janky stuff to keep the cutter's head piece from digging into the spool while drying filament
I had two spools ruined by that so I set out to find a solution. This piece slides into the base and should stay there relatively easy. If yours slips out easily scale it up somewhere beween 0-1% added size.
I printed mine in the same ASA as the snag cutter.
Printed with 0.2mm layer height, 20% infill with fill multiline set to 2, and tree supports for the overhang part.