Universal 32mm Microscope Adapter: LG Monitor Stand & VESA 75/100 Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upcycle your LG or VESA 75/100 stand into a 32mm microscope mount. Heavy-duty ASA design for a solid hobby station
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Give your spare monitor hardware a second life! This heavy-duty adapter allows you to mount a standard 32mm C-mount microscope boom arm onto either a repurposed LG Monitor Stand or any standard VESA 75/100 monitor arm.
Whether you’ve upgraded your monitor to a desk arm and have the original LG stand left over, or you want to mount your microscope on a gas-spring arm for ultimate flexibility, this adapter is the solution.
Dual-Purpose Compatibility
LG Quick-Release Interface: Precision-engineered to fit the proprietary mounting plate found on many LG monitor stands.
Note: To ensure a safe connection, the adapter must be secured to the LG plate with two 3.9 x 13mm screws at the bottom. (Note: 13mm is slightly long but works well; you may use a shorter screw if preferred).
VESA 75 & 100: The backplate features pre-aligned mounting holes for both 75mm x 75mm and 100mm x 100mm VESA patterns. This allows you to bolt it onto any standard monitor arm or wall mount.
Design Highlights
32mm High-Rigidity Column: Optimized for standard 32mm (1.26") microscope boom arms. The large diameter ensures a vibration-free image, even at high magnification.
Heavy-Duty Construction: Built to withstand the torque and leverage of a fully extended microscope arm.
Tested Print Settings (Elegoo Centauri Carbon)
This model has been field-tested and printed with the following setup for maximum durability:
Material: ASA (High stiffness and UV/heat resistance. Recommended over PLA to prevent "creep" under load).
Printer: Elegoo Centauri Carbon.
Build Plate: Textured PEI Plate (for excellent ASA adhesion).
Slicer Profile: Used the "Strong" default settings in the Elegoo slicer.
Supports: Enabled (necessary for the mounting flanges and internal geometry).
Files Included
STL/3MF: Ready to slice and print.
STEP File: Provided for easy remixing. Use this in Onshape, Fusion 360, or SolidWorks if you need to adjust the column diameter for a different arm.
PDF Drawing: Technical dimensions for reference.
