Pentasport 5 Shifter - Cylindrical head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original shifter arms to fit 1.2mm wire with cylindrical head.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of already created model which works great. Reason I created this was because these shifter cables are often cheaper and easier to buy (atleast where I'm from).
Print it flat and with around 80% infill. Dont use supports, overhang should be just fine. The cable head might need a little push to fit in the hole. As always, if the original shifter broke and you want to fix it with this model, clean the wheel/shifter hub first. The shifter housing needs lubrication, any bear/universal grease should be fine.
For assembling, follow the instructions from the original creator. :-)