SuperLongBoard Controller Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The riser provides additional interior volume for the Sienci Labs SuperLongBoard (SLB) controller.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
The riser geometry fits into the slot originally occupied by the plexiglass lid. It’s fastened to the SLB with a 4mm socket head cap screw and flat washer. The screw can be tightened by inserting a 3mm allen wrench through the 4mm heat-set threaded insert in the riser. The plexiglass lid and its thumb screw are relocated to the top of the riser. The thumb screw threads into the heat-set insert. You can replace the heat-set insert by modifying the STEP file to have a drop-in cavity for a standard 4mm hex nut.
I printed the riser using:
Black PETG, 0.4 nozzle, 0.2 layer height, 15% gyroid fill, 3 walls, traditional supports (not tree) are required.