SuperLongBoard Controller Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The riser provides additional interior volume for the Sienci Labs SuperLongBoard (SLB) controller.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
The riser geometry fits into the slot originally occupied by the plexiglass lid. It’s fastened to the SLB with a 4mm socket head cap screw and flat washer. The screw can be tightened by inserting a 3mm allen wrench through the 4mm heat-set threaded insert in the riser. The plexiglass lid and its thumb screw are relocated to the top of the riser. The thumb screw threads into the heat-set insert. You can replace the heat-set insert by modifying the STEP file to have a drop-in cavity for a standard 4mm hex nut.
I printed the riser using:
Black PETG, 0.4 nozzle, 0.2 layer height, 15% gyroid fill, 3 walls, traditional supports (not tree) are required.