1 / 4
Nespresso capsule case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A magazine holding 8 standard Nespresso capsules. 8 it a kind of awkward number, but it is designed not only to fit a mini 180x180 print bed, but also be small enough to fit in a trouser pocked. With 10 capasules it just became too big for both.
Sleeve is printed diagonally upright. Be sure to have prober bed adhesion, and orient it along the y-axis if you have a bed slinger.
The inner case have CAD designed support, designed for 0,2 mm layer height.
When loading the magazine, orient the inner case so you can slide in the capsules from sides while you lock them in place with the sleeve one by one.