Nespresso capsule case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slim magazine holding 8 Nespresso capsules.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 1
- Views
- 70
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A magazine holding 8 standard Nespresso capsules. 8 it a kind of awkward number, but it is designed not only to fit a mini 180x180 print bed, but also be small enough to fit in a trouser pocked. With 10 capasules it just became too big for both.
Sleeve is printed diagonally upright. Be sure to have prober bed adhesion, and orient it along the y-axis if you have a bed slinger.
The inner case have CAD designed support, designed for 0,2 mm layer height.
When loading the magazine, orient the inner case so you can slide in the capsules from sides while you lock them in place with the sleeve one by one.