Kobo Libra Colour stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist stand for displaying your Kobo Libra Colour
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a minimalist "parking spot" for your Kobo. It features an 11mm slot, specifically designed to fit the Kobo Libra Colour perfectly without a case (or with a very thin cover).
If you are looking for a version that fits your Kobo with a sleepcover on: https://www.printables.com/model/1656560-kobo-libra-colour-klc-stand-case-friendly
Dimensions: 80mm (L) x 50mm (D) x 30mm (H)
Stability: The 90° angle and 50mm depth prevent the device from toppling over.
100% Support-Free
I have only tested this with the KLC. If you try it with a Libra 2, Sage, or any other model, please let me know if it works! If you like it, I'd love to see your makes and get your feedback. If you find it useful, please don't forget to leave a like! :)
If you'd like to support my Master's degree and future 3D projects, you can buy me a coffee here https://ko-fi.com/davinci2103
Print Settings
Layer Height: 0.2 mm
Infill: 5% (Gyroid)
Supports: None
Filament: PLA
Printer: Artillery Sidewinder X2