Liczymy pasujące modele…
A kobold with a pickaxe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other kobolds seen in…
A enemy for Tabletop. Category: 3D Printing
A enemy for Tabletop. Category: 3D Printing
A enemy for Tabletop. Category: 3D Printing
A enemy for Tabletop. Category: 3D Printing
Easy to print kobold necromancer for TTRPG (DnD) Should work with both 0.4 and 0.2 nozzle, but I recommend the later. There are 3 versions: 25mm base, 28mm base and full size. I have fixed the crystal so it's not suspended in the air.
Here is a winged kobold / dragonspawn model. I have it in in both 20mm and 32mm and I added a variant with a shortened tail (in case the long tail trailing off the baseplate isn't your jam). I printed the 20mm version but may still print…
Recommend print setting Layer height: 0.28mm (save time) Infill: doesn't matter Material: I tried with PLA+ and PETG, both works fine but will recommend using PETG for durability. *Please noted that the second picture is my own customise…
This is my take on a Kobold Bard. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Easy to print TTRPG (DnD) player character of a Kobold Swordsman. Works well with 0,2 and 0,4 nozzle.
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
I like to read in bed, and it's nice to be able to hold stand the reader up in a landscape orientation for convenient pillow-reading. Combining this with the Kobo Remote and you can just lie on your side and enjoy your favourite book!
The design does not support the Kobo Clara BW model, only the 2E. I found the BW cases designs have the power button and USB port locations off by a few millimeters, but the dimensions of the reader overall are very similar. This case…
Should have a snug fit on your charging adapter. Holes 5 mm for countersunk head screw. Tight the screws by hand. A narrow gap between this part and the wall is provided to press the charging adapter securely against the wall. My Print…
A small adjustable angle stand for table top use (or any flat surface).Supports a phone or e reader (Kindle, Kobo etc). Folds down to 100x96x12mm (X,Y,Z). Opened up and in use the base plate occupies a surface space of 100x73mm (X, Y).…
I bought a Kobo remote for my Kobo Libra 2 colour. A great thing to own, but awkward to carry and easily forgotten when heading out on a trip. So I made this all in one carry solution. It is over engineered as a simple case, but I wanted…
Easy to print kobold necromancer for TTRPG (DnD) Should work with both 0.4 and 0.2 nozzle, but I recommend the later. There are 3 versions: 25mm base, 28mm base and full size. I have fixed the crystal so it's not suspended in the air.
A simple protective plate for your e-reader, usable as-is, or as a plate to integrate in your own cover build. Features include: a hole to install a 3x1mm round neodiddlium magnet for sleep/wake function holes on 4 corners to install a…
A face of my old Kobo Glo e-book reader got broken (plastic degraded over time and is very brittle now). So I modelled it. You will need original parts from your existing face cover: power switch (two parts + spring), light button, LED…
This is my take on a Kobold Gunslinger. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Cleric. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
This is my take on a Kobold Artificer. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Bard. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use…
This is my take on a Kobold Rogue. You might need to resize this model to fit your RPG needs. This is my take on a Harengon Barbarian. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Fighter. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
This is my take on a Kobold Warlock. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Monk. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use…
This is my take on a Kobold Wizard. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
This is a minimalist "parking spot" for your Kobo. It features an 11mm slot , specifically designed to fit the Kobo Libra Colour perfectly without a case (or with a very thin cover). If you are looking for a version that fits your Kobo…
Easy to print TTRPG (DnD) player character of a Kobold Swordsman. Works well with 0,2 and 0,4 nozzle.
I like to read in bed, and it's nice to be able to hold stand the reader up in a landscape orientation for convenient pillow-reading. Combining this with the Kobo Remote and you can just lie on your side and enjoy your favourite book!
Replacement for the upper cable hook of the Vorwerk Kobold VK130/131 vacuum. Part optimised for printing; print as shown below:
This is superficially accurate Kobold D-ring for ESB Luke or ROTJ Vader lightsabers. I designed it to not require supports and mount better to a flat surface, unlike the real Kobold design which has a curved mounting surface and…
Ich habe für das Modell weißes PLA Filament verwendet! Mit Glow-in-the-dark Filament sieht es nachts bestimmt super aus! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa Slicer die maximale Druckgeschwindigkeit auf 80 mm/s…
This 3D printed holder provides a convenient way to keep your Kobo stylus within reach. Simply attach it to the back of your Kobo eReader (works best over the cover) using embedded magnets. Note: Designed for use with 6mm diameter x 5mm…
Fits pretty nicely. Sliced it and printed 100% with support, but it doesn't seem necessary. Printed with a 0.6 and 0,2 layers. Added an small inscription that says “INSERT HERE FIRST” in order to put the device without breaking the…
New D-pad replacement for the Kobo Wireless ereader designed to fix some issues with existing models out there. I saw two existing models out there for D-pad replacements and was not satisfied with them so I designed my own. It is…
Simple low profile stand for the Kobo Clara BW and Clara Color. STLs are provided that hold the device at 60°, 65°, 70°, 75°, and 80°. Original design file is parametric as well for easy modification.
Cable holder for a Vorwerk Kobold vacuum cleaner. My design is rotable like the original. Fits for following Vorwerk models: - Vorwerk Kobold VK 135 - Vorwerk Kobold VK 135 SC - Vorwerk Kobold VK 136 - Vorwerk Kobold i31 Printing:…
TPU Cases for the Kobo Clara BW. There are 3 versions! A thinner case, a thicker case, and a thicker case with bumps on the corners. Personally, the thinner case is a bit too thin for me to be properly protective, and I find that the…
I printed it with a Bambu P1S out of PETG without support in 1h47min. (standard PETG settings) The high version is 45mm wide - 42mm high -95mm long and the lower one is 32mm high. At the picture where its shown at the wall i used the HIGH…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon https://www.patreon.com/c/Adamnant - where you can ask me…
I created this for my Kobo Clara BW, it's likely that it will work for the Kobo Clara Colour and Kobo Clara 2E as they're extremely similar in size . I use the clear case because I wanted to put some stickers on the device, however that…
The design does not support the Kobo Clara BW model, only the 2E. I found the BW cases designs have the power button and USB port locations off by a few millimeters, but the dimensions of the reader overall are very similar. This case…
A Kobold female. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Wallmount for vaccum cleaner Vorwerk Kobold VB 100 I used an TPU filament for the black rubber insert. Just superclued it inside the groove. I will also relase a model without groove in case you do not have any TPU, but to be honbest the…
print both parts and clue them together
print at a low speed with no supports and you need to scale up before slicing. If it's not working rotate on side and print with supports. And remember to post a make!
Protective Case for ebook reader Kobo Libra Colour. I did not find any suitable case for this new reader so I made this simple one. Just slide it in, it should snap in by the wider end where USB charging port is (just be careful when…
Should have a snug fit on your charging adapter. Holes 5 mm for countersunk head screw. Tight the screws by hand. A narrow gap between this part and the wall is provided to press the charging adapter securely against the wall. My Print…
Because the accessories for the Vorwerk Kobold VT-300 vacuum cleaner are very expensive and we have a lot of accessories for our Miele vacuum cleaners, it was obvious to create an adapter. This allows us to use the Vorwerk Kobold with its…
A wallmount for the Vorwerk Kobold vacuum cleaner attachment set. Unfortunately looks like Vorwerk sells well thought out Devices but doesn't waste one thought on how the accessories could be stored properly. I only used some few supports…
Falls man die Akkuhalterung nur hinstellen möchte, habe ich ein weiteres Modell ohne Bohrlöcher hinzugefügt. Infill: 20% sind mehr als ausreichend, reicht evtl auch weniger. Auf den Bildern habe ich es in 0,28 gedruckt.
A vacuum robot is a great thing and ours is so flat, it can even go under the couch. Unfortunately it won't find its way out and will get stuck, so I had to design an extension to the turret, so the safety switch will tell it to turn…
Cookie cutter for the logo of the "Jupfis" (a goblin or "Kobold") at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Blue
This is an Hybrid PLA-TPU Cover i made for my Kobo Glo, It is Print in Place so there are no worries for assembly, the only part you need to add is the KickstandStopper which is in a separate file. Things to bear in mind: -You need a well…
A pair of Gridfinity bins for the Kobo Clara 2E e-reader. One bin stores the e-reader vertically/upright, the other bin stores it horizontally/on the side. Print with your material of choice, no supports needed, don't use a brim unless…
A very simple model of a guard for a kobo style 2. Best printed in TPU 95A. When to tight print a little larger :-)
Here is a new little Kobold with a dagger, another with an axe and another with a small mace for DND and other TTRPGS. This was made with my usual process of thickening the model, sculpting details etc... I also added new hands from my…
Just a simple clamp to "get a hold" on the Vorwerk Kobold 300s vacuum arm. The inlay of the clamp is coated with foram. The clamp itself is fixed with long M3 screws (but also can be customized). Foam:…
Einfache Steckverbindung von Vorwerk Kobold Staubsaugern auf Bosch Saugschläuche
Simple stand to suit Kobo Libra Colour eReader. Can be inserted with buttons on left or right, 40° lean angle.
Used in conjunction with the Lenovo A8 phone, installed in KOBO
Snap lugs in the tray of the dust compartment on a Vorwerk Kobold VR100 vacuum cleaner robot were broken, so it was not possible to use the cleaner anymore, which was otherwise still working fine. There are no official solutions and it's…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
The dirtbin by LazyOdin fits perfect in my VR100 robot but looks a bit strange. That's why I added a lid to cover the whole bin bay. Like the source by LazyOdin it also uses the roomba 880/900 dirt bin filter. Edit: After four months of…
Of course, cats are cute. But two of them with much, much fur killed my vacuum cleaner robot meanwhile three times. There is a constructive issue on the main brush motor. There is a wide gap between the motors case and the output drive…
The new eBook-Reader Kobo Aura One has an incredible wide screen but because of it's therefore wide case it is nearly impossible for people with normal hands to hold this reader with only one hand without getting cramps. This holder let…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
Kobo Clara 2e Stand in 2 versions: - small one for use without protective cover - larger one for use with a protective cover Print with organic support ‘touching buildplate only’ for best results
I made this cover after being hooked on DCC for a while, fantastic book series and I thought it would be a fun project to make a cover that lets me read my books while still keeping the Kobo “naked”, only protecting it while it's in my…
Part for repairing broken buttons on kobo forma 8. Attaches with double-sided tape. Created in FreeCad 1.0, printed TPU95 plastic, layer 0.1mm, nozzle 0.4mm.
Late one night before the tavernkeeper shut his door A wobbly gentleman came in, his footing was unsure Moustachioed and handsome, and his clothing touched the floor He was no man at all, he was three kobolds in a trench coat…
📜 Description: This 3D model is designed especially for Crested Geckos (Correlophus ciliatus) , also known as banana-eaters . The shape and size are optimized for serving fruit-based diets or crested gecko meal replacements such as…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- This Crystal Facets model portrays a Kobold, a small…
A kobold perfect for the dragon minions that we all need. Prints well as is with supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models come follow me on Patreon https://www.patreon.com/c/Adamnant for updates and exclusive minis. Here is another model from my list off of…
