1 / 6
Mini Hangable Planter and Sprouts Grower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Start growing small quantities of healthy sprouts at home!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
I originally designed this to put in our bird's cage as an additional source of healthy food. However it's a nice compact design that can also be used for other purposes; place or hang it anywhere and get regular healthy sprouts to add to your meals. You could even chop off the hanging hooks in the slicer if you have no need for them.
Usage Instructions
- Place the basket in the pot and add about 1-2 teacups of sprouting seeds
- Fill with water to cover the seeds with water, but not much more than that
- Place the cap on the pot (the cap helps retain humidity)
- About once or twice a day, remove the basket from the pot and rinse the seeds with clean water. Also rinse the pot then reassemble and put the cap back on. Continue doing this while the sprouts grow in the following days.
- When the sprouts grow tall enough, remove the cap and continue rinsing regularly. At this point the cap is not necessary as the sprouts are strong enough.
- Collect the sprouts!
Printing Instructions
- Print all parts in their provided orientation, optionally using the provided 3mf as a reference
- Activate supports for the hooks to print properly. It's a very small surface to support so there is not much waste and the supports are easy to remove. Use snug supports in PrusaSlicer for even less waste.