Frame Brace for 2020 frame printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame brace for open frame 2020 extrusion printers. Designed for an Ender5Plus but should work on many more.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Corner frame brace for 2020 extrusion frame printers. Designed it for my Ender5 Plus.
Most other frame braces I found only use a single screw on each side, providing only limited frame stiffening.
These use 3x M4x10mm bolts and 3x T-nuts per side, so six per brace total. You can really bolt these down and add strength to the printer frame.
There's two types of these braces, a regular one and one with a screw hole for the front bar when using this front bar relocator for the Ender5/5plus.
Tap some M5 thread into the ends of the front bar and put an M5 bolt in to connect them to these braces.